Database Configuration

Overview?

Database programs can integrate with FinishLynx in three ways:

1Via a network between two or more computers.
2By running both programs on one computer.
3Via a null modem serial cable between two computers.

How to set up a file-based connection?

Step 1To do this, select Options... from the File drop-down menu, and select the Database tab.
Step 2Set the Data Source: to Files.
Step 3Set Time Precision to Thousandths (recommended setting to assist in the breaking of ties).
Step 4Set the Input Directory: to reflect the directory being used by the FinishLynx computer load start list information from the database.
Step 5Set the Output Directory: to reflect the directory being used by the Database computer to import results.
Step 6Set Write LIF File: to On.
Step 7Exit the software and restart FinishLynx.

How to set up a serial connection?

Step 1Select Options... from the File drop-down menu, and select the Database tab.
Step 2Set the Data Source: to Serial Port.
Step 3Set Code Set: to Single Byte.
Step 4Set Time Precision to Thousandths (recommended setting to assist in the breaking of ties).
Step 5Select the Serial Port: from the list of available ports to reflect the serial port being used by FinishLynx to communicate with the database computer.
Step 6Set Write LIF File: to On.
Step 7Leave the default settings for Baud, Data Bits, Parity and Stop Bits unless you have good reason to change them.
Step 8Exit the software and restart FinishLynx.