MYLAPS

FinishLynx is capable of receiving data from various MYLAPS applications using the LapTime (LT) Plug-in:

note: To receive data from MYLAPS applications, FinishLynx requires the LapTime (LT) Plug-in.

tip: For best results, EtherLynx cameras should be synchronized with GPS time. This can be achieved by adding Internal GPS to your camera, or adding a third-party GPS receiver with Top-Of-Minute capabilities and the External Sync (ES) Plug-in.

MYLAPS Timing & Scoring

How to configure FinishLynx options for MYLAPS Timing & Scoring?

  1. Start FinishLynx.
  2. Go to File | Options... | LapTime tab.
  3. Click New to create a new LapTime device.
  4. Go to File | Options... | Results tab.
  5. Scroll through the fields and enable the following: Cumulative Split Time Last Split Time Laps
  6. Go to File | Options... | Image tab.
  7. Select a color for Show Lines: Splits.
  8. Click Ok to close the Options dialog.
  9. Optional Settings Hold* Ctrl+Shift* and go to File|Options… to open the Other (Hidden) Settings. Expand +LapTime. FillInTime: set value: 2 to have the laptimes fill the Time field on the last lap, even if an EtherLynx camera is used. IdMaxSize: for BibTags, set to 5 to remove the Group ID from tag encoding. IdStripZeros: for BibTags, set to 1 (on) to remove leading zeros from tag encoding. TotalLaps: set to total number splits (1 for single finish decoder). Can be changed in Information Zone of each event. IntSyncMask: for BibTags, set to 2 (guns) if camera is not synced to GPS.

How to download and install MYLAPS Timing & Scoring?

  1. Login to the MYLAPS Partner Portal. Check your email to reset your password.
  2. Click on Support.
  3. Scroll down and click on Timing & Scoring.
  4. Click to Download Timing #.#.# and Timing and Scoring manual.
  5. Install MYLAPS Timing.

How to configure MYLAPS Timing & Scoring for FinishLynx?

  1. Double-click the Timing 64 shortcut.
  2. Login in using your MYLAPSPortal credentials.
  3. Select Start a new event and click Ok. (Optional - Enter the Event name: and Start date)
  4. Go to File|Preferences… and find the Usage and Sync box. Check the box to Create an “Allow all tags” import rule by default and click Ok.
  5. Click the Add device button, select your decoder, and click Assign. (Optional – Enter a location name) Click the icon on to the decoder line and select Load all data (Start from the beginning). Click the Play button on File 1.
  6. Click the Add Exporter button and select TCP/IP Export. Click the cog wheel to configure the TCP/IP Export. Note: If Timing & Scoring is running on a different PC, enter the IP-Address of the FinishLynx PC.
  7. Check the TCP/IP export box on the location banner.
  8. Click the arrow and Connect.

Figure: MYLAPS

Figure: MYLAPS

How to check connectivity between FinishLynx and MYLAPS Timing & Scoring?

Check the Status Bar in FinishLynx for the connectivity status with each LapTime device. It will either show NOT CONNECTED or Received #. If Received # appears, FinishLynx was able to connect to the specified port.

How to synchronize FinishLynx and MYLAPS systems:

EtherLynx cameras with Internal GPS (recommended):

To sync a MYLAPS decoder with your EtherLynxcamera when both devices are synced to GPS time, set the LapTime|Options… Sync. Source = None.

Learn how to synchronize clock to GPS, to sync a MYLAPS BibTag decoder to GPS time,

Learn HOW TO USE THE INTERNAL GPS? to sync an EtherLynx camera with Internal GPS.

EtherLynx cameras without Internal GPS:

To sync the MYLAPS decoder with your EtherLynx cameras when the camera is not synced with Internal GPS (option), press the Gunshot button on the decoder while FinishLynx is running.

tip: If FinishLynx is restarted, this procedure will need to be repeated. It is best practice to trigger a gunshot at the start of every race. The Status Bar will indicate if it is NOT SYNCED.

note: The Gunshort MUST be triggered when FinishLynx is running and connected to MYLAPS Timing & Scoring. If the Gunshot is received late (by replaying data), the sync of the systems will be wrong.

How to configure a remote split location?

For remote split locations using BibTag decoders equipped with a SIM card and cellular network connectivity, enable the CCNet Server.

  1. Go to File|Preferences|CCNet.
  2. Check the box to Enable CCNetServer.
  3. Enter your username and password - send email request to info.americas@mylaps.com
  4. Click Register Devices on Server…
  5. Click Ok.

How to configure my bibtag decoder for a FinishLynx network?

BASIC CONFIGURATION

  1. Connect the BibTag decoder to AC power.
  2. Turn on the BibTag decoder (press the red power button).
  3. Use the Select and Scroll buttons to navigate the menus.
  4. Navigate to Communication > Network and set: Automatic = OFF IP Address = 192.168.0.151 (IP of decoder must be on the same subnet as FinishLynx PC)
  5. Navigate to General > Clock and set: Time Zone = your time zone Daylight Savings = ON/OFF
  6. Connect the BibTag decoder to your EasyMat or SideAntennas.
  7. Connect the BibTag decoder to the FinishLynx network switch. The BibTag decoder is now ready to be added in Timing & Scoring.

ALTERNATIVE (ADVANCED) CONFIGURATION

  1. Install the SIM card in the MYLAPS GPS Modem – follow the instructions in the BibTag Timing System Manual
  2. Turn on the BibTag decoder (press the red power button).
  3. Use the Select and Scroll buttons to navigate the menus.
  4. Navigate to Communication > Server Communication and select GMS.

How to connect a bibtag decoder to a FinishLynx system?

MULTI-CAMERA SYSTEM (TRIAD)

Figure: MYLAPS

SINGLE CAMERA SYSTEM

Figure: MYLAPS