Multiple-Split Interface (MSI) Plug-in

This plug-in will allow the operator to capture multiple ‘finishes’ within a single race. This can either be configured so that a single camera takes multiple pictures at different times, or so that cameras in different locations take pictures at different times during a race (i.e. ¼, ½ , ¾ mile splits in a thoroughbred mile race).

Camera information can be configured for each ‘split location’ and the capture capability can be automatically configured – to capture for a given time at a given moment, or manually switched between capture positions by the FinishLynx operator from within the software.

The software will allow the operator to save and print results for each split of the race which are also included in the LIF.

Overview

When MSI is being set up, there is some information that relates specifically to the event about to be timed. This information can be entered after an event has been opened, or a template can be used to create this information automatically. For information on using templates see Templates.

All capturable cameras are available to be used at every split location.

  • To add one or more split locations to a FinishLynx event:
  1. Create a new Event.
  2. Add split locations as needed.
  3. Add start list data.
  4. Configure the Capture options.
  5. Capture a split location.
  6. Advance to the next split (repeat step 4 & 5 for each split).
  7. Evaluate each split locations.
  8. Save the event.
  • The images and results for each split locations are stored with the file and can be reopened as needed.

note: Each split location has a unique Results Zone and Image Zone that appears when a split is selected from the Information Zone.

Multiple Split Interface

Figure: Multiple Splits Interface

What is a split location?

In FinishLynx, a Split Location is group of cameras configured to capture in an independent Image Zone and produce results in an independent Results Zone.

By default, a new Event always has one split location named "Finish". With MSI, multiple Split Locations can be added to meet the requirements of the sport.

What is an active split?

The Active Split is the split location selected to capture image. The green square with the letter "c" in the Information Zone indicate the current Active Split.

Figure: Multiple Splits Interface

What are the different capture options?

In order to capture image at each split, two capture options must be defined:

  1. Advance capture. Manual Capture is advanced to the Active Split by clicking the Advance capture icon , or Event | Advance Capture from the Menu Bar. Timed Capture is advanced to the Active Split by setting the Start and Duration parameters for the selected split.
  2. Capture method. See Image Capture for details.

tip: When the capture is active for a Split Location a lower case letter “c” will be visible to the left of the camera listing in the Information Zone.

Capture Option Combinations

FinishLynx offers 6 different capture combinations.

Manual/Manual

With this setup, the operator should select the Manual capture method, press the capture button to capture image and manually select the Active Split.

Timed/Manual

With this setup, the operator should select the Manual capture method, press the capture button to capture image and FinishLynx will automatically advance the capture function to the Active Split location at the predetermined time after the start.

Manual/ACM

With this setup, the operator should select the Automatic capture method, enable capture for the event and manually select the Active Split.

Capture will take place whenever there is sufficient activity at the finish line to satisfy the requirements of the ACM settings for the Active Split.

Timed/ACM

With this setup, the operator should select the Automatic capture method, enable capture for the event and FinishLynx will automatically advance the capture function to the Active Split location at the predetermined time after the start.

Capture will take place whenever there is sufficient activity at the finish line to satisfy the requirements of the ACM settings for the Active Split.

Manual/Timed

With this setup, the operator should select the Timed capture method and manually select the Active Split.

note: To switch on capture for the entire time a Split Location is active, leave both the Start and Duration fields blank.

Fully Automatic

With this setup, the operator should select the Timed capture method and FinishLynx will automatically advance the capture function to the Active Split location at the predetermined time after the start.

Allow Button Override

note: This feature can be used with any form of manual capture, whether using a capture button or the keyboard. If you are only using one split, we recommend you always have this feature active. In one split setups where multiple cameras are using timed capture, this feature allows a manual capture to override a timed capture. With multi-split events, you should consider all of the possible event outcomes before deciding to enable this feature.

How to add or delete a split location?

  • To add a split location:
  1. Click Event | Add Split Location from the Menu Bar.
  • To delete a split location:
  1. Click to select the split location in the Information Zone, it will highlight in white.
  2. Click Event | Delete Object from the Menu Bar.

How to add or delete a camera from a split location?

  • To add a camera to a split location:
  1. Click to select the Split Location in the Information Zone, it will highlight in white.
  2. Click Event | Add Camera from the Menu Bar and select the desired camera from the sub-menu.
  • To delete a camera from a split location:
  1. Click to select the camera from the Split Location in the Information Zone, it will highlight in white.
  2. Click Event | Delete Object from the Menu Bar.

How to add start list data to a split location?

  • To add start list data in the Results Zone of a split location:
  1. Use the Schedule icons in the Results Zone.

How to configure timed capture advancement?

  • To set the times when capture is possible follow the steps below.
  1. Click on the Split Location in the Information Zone. Two fields are available: Start and Duration.
  2. In the Start field, enter the time after start when you want capture to be available and then press the Tab key.
  3. If the Duration field is left blank then capture will be possible in this Split Location up and until capture is advanced to the next Split Location. If a value is entered in the Duration field, then capture will be available for this period of time, or until capture is advanced.

note: Capture always moves to the latest Split Location if two are configured to be active at the same time.

Notes

note: The MSI Plug-in can set EtherLynx cameras independently for taking timed capture, Automatic capture, and manual capture splits. Active times of more than one split captured from different cameras can overlap, allowing multiple splits to be captured at the same time.

note: If overlapping splits have any cameras in common, FinishLynx prioritizes the capture of the later split over the earlier split.