General Options

Options - General Tab

Figure: General

Competition Name: (free-text)

This name will appear on the header line of all print-outs: results and pictures.

Competition Sponsor: (free-text)

This name will appear on the bottom right hand side of the footer on all print-outs: results and pictures.

Capture Button: (drop-down)

List of available serial ports to configure the capture button.

  • Keyboard keyboard capture is used when Keyboard is selected instead of a serial port.

Allow button override (checkbox)

When checked and Timed Capture is used, this feature enables manual capture outside the timed capture settings.

Hardware Type:* (radio button)

  • None When selected, FinishLynx is used in reader mode and will not try to load any EtherLynx or IdentiLynx cameras.
  • SCSI When selected, FinishLynx will only try to load SCSI Lynx cameras.
  • Ethernet When selected, FinishLynx will only try to load EtherLynx or IdentiLynx cameras.
  • Detect (default) When selected, FinishLynx will load all detected SCSI, EtherLynx or IdentiLynx cameras.

Camera Network:*

  • <not specified> The Network Interface Card (NIC) used to find cameras is not defined. FinishLynx will attempt to load cameras from each NIC.
  • 192.168.0.5 Default value. This IP address is recommended for the NIC used to load cameras.
  • ###.###.###.### Value of other NICs found by FinishLynx on your computer.

Remote control: (drop-down)

List of available ports to connect the Remote Control Commands.

Font:* (drop-down)

List of available fonts to be used in the FinishLynx interface.

  • Font size box (free-text) Enter the preferred font size.
  • Bold (checkbox) When checked, text in the FinishLynx interface will appear in bold.

Language (drop-down)

FinishLynx is available in the following languages:

  • Arabic
  • Chinese (Simp.)
  • Chinese (Trad.)
  • Deutsch
  • Espanol
  • Suomi
  • Français
  • Magyar
  • Italian
  • Korea
  • Polish
  • Portuguese (Brazil)
  • Russian
  • Swedish

See Customizing the FinishLynx User Interface to learn how to use a different language.

Profiles (drop-down)

<standard> represents the default Profile. List is populated with additional built-in (VeriLynx) or user defined profiles.