Seeding athletes

Modifying seeding criteria

LynxPad seeds athletes for each event according to default seeding criteria, which you can modify to suit the needs of your competition.

Changing the number of lanes or positions

By default, the number of lanes or positions is set to 8.

To change the number of lanes or positions

  1. Double-click the event from the Events window for which you want to change the number of lanes. The Add/Edit Event dialog appears.
  2. Click in the Number of Lanes: or Number of Positions: text field and type the new number.
  3. If you are editing an existing event, click Update. The number of lanes for the event is changed.

note: If there are seeded athletes in this event, the number of lanes will not be changed until you unseed the athletes, update the event, and then reseed the event.

Changing lane or position assignment criteria

  1. Double-click the event from the Events window for which you want to change the lane or position assignment criteria. The Add/Edit Event dialog appears.
  2. From the Lane/Position Assignment: drop-down list, select the appropriate assignment criteria.
  3. If you are editing an existing event, click Update. When seeded, athletes are assigned to lanes or positions according to the criteria you selected.

tip: It is possible to change the lane preferences (see "Changing lane preferences") for the Standard and Waterfall Positions criteria.

Changing lane preferences

You can change the lane preferences in the Standard and Waterfall Positions criteria.

appears.

  1. Click the Seeding tab.
  2. Depending on which preference you want to change, click either the Standard Lanes... or Waterfall Positions... button. A Lane Preferences dialog appears.
  3. To change a lane preference, click in a cell and type a new number. When finished, click OK. The lane preferences reflect the changes you just made

note: Click the Reset button to return lane preferences to their default settings.

Changing the heat or flight assignment criteria

You can modify the way athletes are assigned to heats or flights.

  1. Double-click the event from the Events window for which you want to change the heat or flight assignment criteria. The Add/Edit Event dialog appears.
  2. Select a new assignment criteria from the Heat/Flight Assignment: drop-down list.
  3. If you are editing an existing event, click Update. The athletes will be assigned to heats and flights according to the new criteria you selected.

Changing the heat or flight order

You can change the order in which heats or flights are contested.

  1. Double-click the event from the Events window for which you want to change the heat or flight order. The Add/Edit Event dialog appears.
  2. Select the new heat or flight order designation from the Heat/Flight Order: drop-down list.
  3. If you are editing an existing event, click Update. Heats or flights are ordered according the order you just selected.

Selecting how athletes advance

LynxPad allows you to select whether athletes in timed events advance to subsequent rounds based either on Time or on Time & Place.

  1. Double-click the event from the Events window for which you want to change the advancement. The Add/Edit Event dialog appears.
  2. Select the new advancement criteria from the Advancement: drop-down list.
  3. If you are editing an existing event, click Update. Athletes advance to subsequent rounds in the competition based on the advancement criteria you just selected.

note: If you select the Place & Time advancement criteria, you will be able to select an advancement formula suggested by LynxPad later when you seed the event (see "Seeding athletes according to seeding criteria").

Seeding athletes according to seeding criteria

After you have assigned athletes to the event and modified the seeding criteria (see "Modifying seeding criteria"), seed athletes by following these steps.

note: You can also seed athletes manually (see "Seeding athletes manually") and you can seed multiple events at once (see "Seeding multiple events at once").

  1. Click to select the event and round you want to seed from the Events window.
  2. Click the Heats window title bar to activate it.
  3. Either click from the Heats window or click Heats/Flights | Seed from the Menu bar. The Seed - [Event Name] dialog appears.
  4. Click Seed. If the event has multiple rounds, the Advancement Selection dialog appears.
  5. In the Number of Heats next round field, type the number of heats or flights you want athletes advanced into for the next round.
  6. Click Apply. LynxPad automatically calculates the number of athletes to advance.
  7. If you selected Place & Time when specifying the advancement criteria, LynxPad suggests several advancement formulas for you to select. Click to select one from the list.
  8. Click OK to exit the dialog. The athletes are seeded into the heats according to the criteria you specified earlier.
  9. Click OK again. Click Yes when asked if you want to update the start lists.

Seeding athletes manually

After you have assigned athletes to the event, you can seed them manually by following these steps:

  1. Click to select the event and round you want to seed from the Events window.
  2. Either click from the Heats window or click Heats/Flights | Seed from the Menu bar. The Seed - [Event Name] dialog appears.
  3. Next to the Heat [#] in the Seeded: box, click the + to display the lanes.
  4. Click to select a lane you want to seed an athlete into.
  5. Click to select an athlete from the Unseeded: list of athletes.
  6. Click. The athlete moves into the lane you selected. Repeat these steps to manually seed all of the athletes. Clicking moves the athlete out of the heat into the Unseeded: box.
  7. When finished, click OK. If the event has more than one round, the Advancement Selection dialog appears.
  8. In the Number of Heats next round field, type the number of heats or flights you want athletes advanced into for the next round.
  9. Click Apply. LynxPad automatically calculates the number of athletes to advance.
  10. Click OK to exit the dialog. The athletes are seeded into the heats according to the criteria you specified earlier.
  11. When finished, click OK to exit the dialog.

Seeding multiple events at once

You can seed more than one event at once by following these steps:

  1. Click somewhere in the Events window to activate it.
  2. Either click or click Events from the Menu bar and select Seed selected list.... The Select rounds to seed dialog appears.
  3. Click to check the box next to each event you want to seed.
    • To select all of the events listed in the dialog, click the Select All box.
    • Clear any checkboxes by clicking the Clear All box.
  4. After you have selected the events you want to seed, click OK. The Seed - [Event Name] dialog appears for the first event.
  5. After making any modifications to the Seed dialog for this event, click OK. A new Seed - [Event Name] dialog appears for the next event you selected to seed.
  6. Make any modifications, and then click OK again, and repeat this step. When finished, click Yes when asked to update the start lists.

Unseeding athletes

To unseed athletes who are seeded into an event:

  1. Click to select the event you want to unseed from the Events window.
  2. Click the Heats title bar to activate it.
  3. Either click or click Heats/Flights | Seed from the Menu bar. The Seed - [Event Name] dialog appears.
  4. Click the Unseed All button and then click OK to exit the dialog. The athletes are unseeded from the event.

Changing the number of heats or flights

Depending on the number of athletes you have assigned and the number of lanes or positions you have specified for the round, LynxPad automatically calculates the number of heats or flights. Follow these steps to modify the number of heats or flights in the round.

  1. Click to select the event and round you want to modify from the Events window.
  2. Either click from the Heats window or click Heats/Flights | Seed from the Menu bar. The Seed - [Event Name] dialog appears.
  3. In the Number of heats field toward the bottom of the dialog, type a new number of heats or flights and then click Apply. The heats or flights are changed to reflect the number you just entered.

Adding a heat

You can add a heat from the Seed dialog after seeding athletes into heats. With the Seed dialog open, click the Add Heat button. A new heat is added to the list of heats in the Seeded: box.

Selecting the advancement criteria

LynxPad allows you to select the criteria upon which athletes advance to subsequent rounds after athletes have been seeded into an event.

  1. Click to select the event you want to modify from the Events window.
  2. Click Events from the Menu bar and select Advancement Criteria.... The Advancement Selection dialog appears.
  3. Click to select the advancement criteria you want applied to the event.
  4. Click OK. Athletes advance to the next round according to the criteria you just selected.

Randomizing lane assignment

By default, LynxPad is set for no randomization of lanes. To randomize the lanes to which athletes are assigned:

  1. Click to highlight the event you wish to modify from the Events window.
  2. Click. The Seed dialog appears.
  3. In the lower left corner of the dialog, there is a Randomization of Lanes box. Either select Randomize All Lanes or Randomize Half and Half to modify the lane randomization.

Using the Randomize Half and Half selection

If the athletes in an event are seeded according to a serpentine seeding criteria with standard lanes, you can select the Randomize Half and Half option. Randomize Half and Half means that the first half of the preferred lanes are seeded as a group. Next, the second group of lanes, those which are least preferred, are seeded as a group.

For example, say the lane preferences for the 100 meter dash are in the best to worst order of: 4,5,3,6,2,7,1, and 8. If you choose Randomize Half and Half, LynxPad randomizes the best seed times into lanes 4, 5, 3 and 6. Then, LynxPad randomizes the remaining seed times into lanes 2,7,1 and 8.