Training System Setup: overview

Now that you have mounted your ReacTime Training System to a starting block, you are ready to follow the instructions in this chapter to learn how to start training with your ReacTime Training System.

If you have purchased extra items such as a Gun Sensor or single or multiple Photoeyes, or if you want to learn how to link together two ReacTime Training Systems, refer to Step 8: Step 9: and Step 10: at the end of this chapter.

Before you Begin

When you are setting up your ReacTime Training System, you need to know where various cables connect to the Block Sensor. Also, you need to be familiar with the key functions on the Block Sensor keypad. Figure 22 shows the Block Sensor input and keypad labels you will use.

Figure: Overview

Figure 22: ReacTime Block Sensor inputs and keys

Inputs

  1. Power supply
  2. Serial Cable
  3. False Start Cable (used with ReacTime Championship False Start Detection System only)
  4. Loudspeaker
  5. Photoeye
  6. Signal Input Cable (for Start Button or Gun Sensor)

Figure: Overview

Keys