Step 5: Send data to ResulTV from FinishLynx

Configure the scoreboard from within FinishLynx by clicking Scoreboard | Options…. Then, either consult your FinishLynx Operator's Manual for specific instructions on configuring the scoreboard to display a start list, results, and running time, or follow these suggested steps.

  1. Select the Results: Auto radio button to display results automatically.
  2. Next to Running Time: click the Options down-arrow to expand the drop-down menu and check the “Send results if armed” option to display the start list as soon as you open the event in FinishLynx.
  3. Next to Results: click the Options down-arrow to expand the drop-down menu and check the Always Send Place box to display place as soon as you evaluate the FinishLynx image.
  4. Check the Paging: box, type 6 in the Size box, and type 5.0 in the Time box to scroll through 6 lines at a time at an interval of 5 seconds.
  5. Verify the scoreboard status is “Running.” If not, make sure there is a selection next to Serial Port: then Click OK and restart FinishLynx. The start list displays automatically when you open a new event in FinishLynx.

This completes the Quick Start Tutorial. Continue reading this User's Guide for detailed instructions on: