Working with Video Display objects

Video Display Objects

Video Display objects enable the same Functionality as the Video Display Module (VDM) camera upgrade in Vision-Series cameras. By Using a Video Display object in a ResulTV layout, you can generate the content from commands in a compatible Lynx Scoreboard Script (LSS) file in FinishLynx, FieldLynx, or LynxPad.

To create a layout using Video Display objects

  1. Create a source using the VideoDisplay.rss and configure the port settings.
  2. Restart ResulTV.
  3. Click File | New to create a new layout, and then Layout | New Video Display (or open the sample 2x1_VideoDisplay.rtv).
  4. Click Layout | Edit Objects… to define the Position, Size, or Rotation of the object.
  5. Click OK.
  6. Set up and configure a scoreboard using a compatible ResulTV_Video_[identifier].lss script in FinishLynx, FieldLynx or LynxPad.

note: ResulTV_Video compatible scripts are much like VDM scripts, except for a different wrapper. Each packet must start with \01V\02 and end with \05\03\04 to be recognized by ResulTV.

Video Display Object Properties

Video Display objects must have the following Basic properties: Type: Dynamic and Field: Video Display Data

To change a Video Display object’s properties

  1. Double-click a Video Display object. The Object Properties dialog appears.
  2. Click on the Basic tab.
  3. Next to Type: select the Dynamic radio button.
  4. Next to Field: select Video Display Data from the drop-down menu.
  5. Click OK.

It is possible to rotate how a Video Display object displays…

To rotate how a Video Display object displays left or right

  1. Double-click a Video Display object. The Object Properties dialog appears.
  2. To rotate the object 90° to the left, select the Left radio button.
  3. To rotate the object 90° to the right, select the Right radio button.
  4. To return the object to no rotation, select the Off radio button.
  5. Click OK.

note: You can also change the rotation of the entire display (See Scrolling the ResulTV Display). If both the display and the Video Display object are set to rotate Left or Right, the content in the Video Display object will appear upside down.

Just like with dynamic bitmap objects (See Working with graphics objects), it is possible to load bitmaps into a Video Display object by using an Image block defined in the LSS. All parameters are controlled in the LSS. The ResulTV_VideoDisplay_Example.lss shows how to load a flag from C:\ResulTV\flags when the country code is included in the User3 field.

note: Any supported type of bitmap can be loaded, however animated GIFs will only show the first frame.