Sending data from FinishLynx

Sending a start list and results from FinishLynx

You can configure FinishLynx to send a start list or results to ResulTV automatically or you can configure it to send the data manually.

  1. Run FinishLynx.
  2. Click Scoreboard | Options. The Options dialog appears.

To send a start list or results from FinishLynx to ResulTV

automatically a) At the bottom of the dialog, there is a Results: section. Select the Auto radio button and then click OK.

Figure: Sending data from FinishLynx

b) Assuming you have already configured ResulTV and FinishLynx to exchange data serially or over the network, ResulTV will display the new start list as soon as you open it in FinishLynx.

To send a start list or results from FinishLynx to ResulTV manually

a) At the bottom of the dialog, there is a Results: section. Select the Manual radio button and then click OK.

Figure: Sending data from FinishLynx

b) Open a start list or results in FinishLynx. c) Assuming you have already configured ResulTV and FinishLynx to exchange data serially or over the network, click Scoreboard from the menu bar and choose Refresh. The start list or results are displayed on ResulTV.

Sending running time from FinishLynx

These steps assume you have already configured FinishLynx and ResulTV to exchange data serially or over a network, and that you have created and selected a script for a new scoreboard in FinishLynx.

Instructions

  1. Run FinishLynx.
  2. Click Scoreboard | Options from the Menu bar. The Options dialog appears.
  3. In the middle of the dialog, there are Running Time: selections. Click the Normal radio button.
  4. Click OK and then Restart FinishLynx. FinishLynx is now configured to send running time to ResulTV. When the timing circuitry in the camera starts, ResulTV displays the running time.

Display running time and results

You can have more than one layout open and toggle between the display of running time and results when FinishLynx is one of the data sources.

  1. Start at the ResulTV configuration screen.
  2. Click File | Open from the Menu bar and double-click the Time.rtv layout file. The running time layout appears on the screen.
  3. Click File | Open from the Menu bar again and double-click one of the other layout files to show results. The layout file you just selected appears on the screen.
  4. Configure the text and graphics objects as desired, and set up the data sources.
  5. Now that you have opened both layouts, simultaneously press the Alt and 1 keys and then simultaneously press the Alt and 2 keys on the ResulTV computer to toggle between the layouts.