Connecting the computers
The computer running ResulTV and the data source computers running FinishLynx, Hy-Tek Meet Manager, etc. can be connected by one of two ways:
- With a null modem cable attached to both computers' DB9 serial (COM) port. You can buy a DB9 null modem cable from Lynx or at Radio Shack, CompUSA or similar store.
- By wired or wireless Ethernet. Make sure all of the computers have a wired or wireless Ethernet card installed and are on the same network.
Optional: You can also run ResulTV and FinishLynx on the same computer and connect a second monitor (see Displaying ResulTV on multiple monitors) to the ResulTV computer.
Using ResulTV over a serial connection
Connect the ResulTV computer to a data source computer or SeriaLynx unit using a DB9 null modem cable. Attach each end of the null modem cable to a device's COM port.
Increasing the COM ports
You must have one available COM port on your ResulTV computer for every data source it is receiving data from. If you need to create an extra COM port to accommodate additional data sources, use a serial port add-on card or a USB to serial adapter. Otherwise, we recommend that you put all of the computers on an Ethernet network and follow the instructions in this User's Guide to configure ResulTV to listen to each data source over the network (see "Using ResulTV over a network").
Using ResulTV over a network
You can put the ResulTV computer and all of the data source computers on a wired or wireless Ethernet network and then configure ResulTV to listen for data from each source.
Pre-requisites
For ResulTV to get data from sources over a network, the following conditions must exist:
- Your ResulTV and data source computers (such as FinishLynx) must all have wired or wireless Ethernet network cards installed and must all be on the same network.
Instructions
- Go to File | Options in ResulTV and create a new data source (see "Creating a new data source"), select the script, and give the source a unique name.
- Select Network (listen) from the Serial Port: drop-down list. Then, tab to the Port text field and type the same port number the FinishLynx computer's scoreboard port setting is set to. Click OK to return to the ResulTV configuration screen.