FinishLynx "Other Settings"

Every setting behind Ctrl+Shift in FinishLynx — the window you know, with what each setting does and its default. Known to timers as the hidden settings.

Hardware\Align2D\AlignIdL

Draw alignment lines on IdentiLynx images.

0=Off

1=On

How to change it

  1. In FinishLynx, hold Ctrl+Shift and click File | Options. The Other Settings window opens.
  2. Expand Hardware, then Align2D, and select AlignIdL.
  3. Note the current Value before you change it, then click OK.
  4. The default is 0; set it back to that to undo the change.
  5. Close and reopen FinishLynx so the change takes effect.

All FinishLynx “Other Settings”