FinishLynx "Other Settings"

Every setting behind Ctrl+Shift in FinishLynx — the window you know, with what each setting does and its default. Known to timers as the hidden settings.

Hardware\Align2D\CLOffset\On

2D alignment offset of centerline on/off.

0=off, 1=on

How to change it

  1. In FinishLynx, hold Ctrl+Shift and click File | Options. The Other Settings window opens.
  2. Expand Hardware, Align2D, then CLOffset, and select On.
  3. Note the current Value before you change it, then click OK.
  4. The default is 1; set it back to that to undo the change.
  5. Close and reopen FinishLynx so the change takes effect.

All FinishLynx “Other Settings”