FinishLynx "Other Settings"

Every setting behind Ctrl+Shift in FinishLynx — the window you know, with what each setting does and its default. Known to timers as the hidden settings.

Hardware\Focus\Autofocus\Enabled

Autofocus control.

0=Disabled

1=Enabled: w/o camera firmware update.

2=Enabled: w/ camera firmware update.

3=Test: Ctrl-Shift-Click drives lens full near/far (autofocus disabled)

Changes will take effect the next time the application is run.

How to change it

  1. In FinishLynx, hold Ctrl+Shift and click File | Options. The Other Settings window opens.
  2. Expand Hardware, Focus, then Autofocus, and select Enabled.
  3. Note the current Value before you change it, then click OK.
  4. The default is 2; set it back to that to undo the change.
  5. Close and reopen FinishLynx so the change takes effect.

All FinishLynx “Other Settings”