FinishLynx "Other Settings"
Every setting behind Ctrl+Shift in FinishLynx — the window you know, with what each setting does and its default. Known to timers as the hidden settings.
Scoreboards\2\AutoBreak
Will cause a selected type of beam break to be applied regardless of the scoreboard status and capture state.
0=off 1=pause 2=finish
- Type: Int
- Default: 0
How to change it
- In FinishLynx, hold Ctrl+Shift and click File | Options. The Other Settings window opens.
- Expand Scoreboards, then 2, and select AutoBreak.
- Note the current Value before you change it, then click OK.
- The default is 0; set it back to that to undo the change.
- Close and reopen FinishLynx so the change takes effect.