FinishLynx "Other Settings"

Every setting behind Ctrl+Shift in FinishLynx — the window you know, with what each setting does and its default. Known to timers as the hidden settings.

Scoreboards\5\AutoBreak

Will cause a selected type of beam break to be applied regardless of the scoreboard status and capture state.

0=off 1=pause 2=finish

How to change it

  1. In FinishLynx, hold Ctrl+Shift and click File | Options. The Other Settings window opens.
  2. Expand Scoreboards, then 5, and select AutoBreak.
  3. Note the current Value before you change it, then click OK.
  4. The default is 0; set it back to that to undo the change.
  5. Close and reopen FinishLynx so the change takes effect.

All FinishLynx “Other Settings”