FinishLynx "Other Settings"

Every setting behind Ctrl+Shift in FinishLynx — the window you know, with what each setting does and its default. Known to timers as the hidden settings.

WindGauge\ReadingLockout

Refers to whether a wind gauge will accept a new command while a current reading is taking place.

If not, FinishLynx must wait before sending another request.

0=Never wait 1=Wait If Reset Not Supported 2=Always wait

How to change it

  1. In FinishLynx, hold Ctrl+Shift and click File | Options. The Other Settings window opens.
  2. Expand WindGauge, and select ReadingLockout.
  3. Note the current Value before you change it, then click OK.
  4. The default is 1; set it back to that to undo the change.
  5. Close and reopen FinishLynx so the change takes effect.

All FinishLynx “Other Settings”