FinishLynx 11.10

What's New

Scoreboard Improvements

Sticky Use 24-hour format

Once you enable 24-hour format, it will stick after restarting FinishLynx.

Track Live Results Mode

The point of this mode is to follow the most interesting results at any given point of a race. When Track Live Results is enabled, scoreboard paging will skip results that have been previously shown and target new information.

A few examples help illustrate how this works:

To enable Track Live Results mode:

Figure: FinishLynx 11.10

tip: Track Live Results uses a number of PageMode advanced settings to customize the behavior. See the Advanced Settings section for details.

Results Options Improvements

Results|Edit result (F2)

This new option allows you to enter edit mode for the current selection in the Results Zone.

Results|Find ID...

This option now lets you select the search key, so you could also search by Lane or User# field for example. In addition, this function now finds unevaluated result lines and moves the IdentiLynx image if applicable.

Results|Previous/Next Image (Shift-ArUp/Shift-ArDn)

This moves the current results selection up or down by one line and tracks the associated image, if evaluated or has LapTime data.

tip: Shift-click a different result line to show its image. You can control where the image is centered in the image panes, and when the image should scroll, by changing the Event\Results\ImageCenter advanced settings.

note: The Previous and Next function, without image search are also available but not shown. They can be added with the Advanced Settings using \Strings\MenuBar\Results\Prev and/or Next.

Results|Previous/Next Split (Shift-ArLt/Shift-ArRt)

This moves the image through the selected participant's split times.

tip: When moving the hash line to a split time, the split number and elapsed time are displayed in the status bar (bottom left).

note: If the evaluated time is exactly the same as the last split time, the hash line will appear "stuck" for one move.

Time Trial (TT) Plug-in Improvements

Duplicate Starts

In Time Trial mode, if FinishLynx detects an existing start for the current start key, it will pop-up a Duplicate Start dialog. When a duplicate start is accepted, the existing start has its key value cleared.

Start Key Updates

When a start key is modified after results have been evaluated, the results update automatically without the need to select the line.

General Improvements

New EVT Event Header Fields

Wind Mode and LapTime Info can now be loaded from the Lynx.evt when creating a new event. Omit or leave the fields blank for the standard behavior.

Event Header Field #12 - Wind Mode

tip: FinishLynx will look for either the English Wind Mode strings detailed above or those specified in the current language configuration.

note: For modes that use a start and/or duration, if those are omitted, the default values will always be used.

Event Header Field #13 - LapTime Information

Customizable Selection Background Color

Ever find it hard to see which line is currently highlighted? You can now change the background color of the current selection in the Information Zone, Results Zone and Hardware Control window. See the SelectBG advanced settings for details.

LapTime - Create Results Optimization

Time Tracking Optimization

The hash line on time tracked images will now default to being centered in the image pane.

tip: You can control how a time tracked image is centered using Event\Image\Hash\TrackCenter. -1 returns to the old behavior.

Powerful Overlay Management

If you use a large number of overlay images (some have over 100!), you'll appreciate this new way to control how they can be organized in the Image|Overlay menu hierarchy. You can group images into submenus, set the order in which they appear, enable the repeat function and define shortcuts, all by using optional parameters at the beginning of the filename.

This option starts and ends with a "#" (number sign) in the filename, in between which you can enter parameters:

Groups

You can create up to 10 groups (Gn = 0-9) and each group can contain up to 100 overlays (Pn = 0-99). Assigning images to groups 1-8 will create a "Group #" submenu item to easily find the relevant images. The order of the images in a group, the repeat function and the shortcut to quickly display an overlay image can also be configured by adding optional parameters to the beginning of the file name.

tip: You can modify the text of the submenu item by modifying the language file (.lng) or by accessing the Other Settings: Strings\MenuBar\Images\Overlay\Groupn. Leave a Groupn field blank to remove the submenu and have overlays appear at the top level, or enter a name to create a submenu.

note: Images assigned to Group 0 will appear at the top of the main overlay menu, above any submenus. Images assigned to Group 9 will also appear in the main overlay menu, below any submenus. Images that do not have a group explicitly set will be assigned to Group 0.

Shortcuts

To define your own shortcuts to display an overlay, first set the "S" parameter between number signs followed by a comma and the shortcut key definition. By default, the position values 0-9 assign that item the corresponding Ctrl + n shortcut key. This will happen even if another item (in another group) is already using that key. In such a case, the first one found will be displayed. To prevent this from happening you can add the "S" option to get the shortcut from the filename, even if the filename does not contain a shortcut.

Examples
Legacy Method
Equivalent - Using New Method
2 Groups - Using New Method

tip: The "S" options in group 2 prevent the Ctrl+n shortcuts.

2 Groups - Using New Method with Shortcuts for all
Screenshot example

Figure: FinishLynx 11.10

Figure: FinishLynx 11.10

Figure: FinishLynx 11.10

note: The legacy overlay management method is still functional.

Support for Additional Shortcut Keys

The following key identifiers can be used in menu items, just like any other key (F1, F12, A, B, etc.). They must appear exactly as written below, including capitalization:

tip: Like Functions keys, they can be used without any other modifier (Ctrl, Alt, Shift). To learn how to create your own customized shortcuts, go to https://www.finishlynx.com/support/finishlynx-keyboard-shortcuts/

note: If a key already has a function in FinishLynx and it is used in a menu item, the menu use will supersede the existing function. Be careful with keys that already do important functions like Esc or Enter.

Support for Additional Items Via Shortcuts

tip: To learn how to create your own customized shortcuts, go to https://www.finishlynx.com/support/finishlynx-keyboard-shortcuts/

Additional Default Shortcuts

Results Zone
Shift-ArUpGo up one line and show the relevant image
Shift-ArDnGo down one line and show the relevant image
Shift-ArLtGo to the previous split for the selected participant
Shift-ArRtGo to the next split for the selected participant
Shift+PgUpPage up the results list
Shift+PgDnPage down the results list
Shift-HomeGo to the top of results list
Shift-EndGo to the bottom of results list
Image Zone
PgUpPage the image left
PgDnPage the image right
HomeGo to the beginning of the image
EndGo to the end of the image
Ctrl-ArLtScroll move (image and hash) left
Ctrl-ArRtScroll move (image and hash) right
Ctrl-ArUpScroll move (image and hash) up
Ctrl-ArDnScroll move (image and hash) down
Ctrl-Shift-ArLtPage move (image and hash) left
Ctrl-Shift-ArRtPage move (image and hash) right
Ctrl-Shift-ArUpPage move (image and hash) up
Ctrl-Shift-ArDnPage move (image and hash) down
Ctrl-HomeMove image and hash to the beginning
Ctrl-EndMove image and hash to the end
Ctrl-+/-Zoom in/out

tip: The mouse wheel scrolling in image panes supports Shift (page) and Ctrl (beginning/end) in both EtherLynx and IdentiLynx images.

note: Run FinishLynx as Administrator (right-click shortcut + Run As Administrator) for best performance.

ADVANCED - Other Settings

Additional Other (hidden) settings are included:

tip: In addition to the standard colors (1-10) shown in the setting comments, the "dark" version of RGB and CMY are also available (11-16).

note: These advanced settings are for experienced users only. For more information on how to access these settings, please contact our support team.

Other FinishLynx releases