Pro, Fusion or 2000+ camera (5L300 <= SN <= 5L420)
On an EtherLynx Pro (5L300), Fusion (5L400), Scholastic (5L410) or 2000+ (5L420), a BOOT light that stays solid red usually means the BIOS chip on the camera's board has failed or reset itself. Lynx supplies a replacement chip, and you can fit it yourself.
Check first that the camera has a board the replacement chip fits. The Camera BIOS Chip Replacement Guide shows each step with photos.
How to fix it
Check the board is compatible
- On the computer that has booted this camera, open
C:\Lynxand openLynx.cm1in Notepad. In some cases there is also aLynx.cm2 - Press Ctrl+F and search for CPU to find the line with the camera's CPU specs
- Confirm that it says
1600 Mhz Type 4 Div 4- It matches: the board is compatible. Request the chip with the button at the bottom of this page, then fit it as below
- It doesn't match: don't replace the chip. There may be another fault, and Lynx support will go through the repair options with you. Use the button below
Fit the new chip
- Remove the 4 screws on the outer corners of the front plate and take the plate off
- Remove the 4 screws on the outer corners of the back plate
- Pull the body of the camera out by the back plate
- Remove the 4 screws from the heat sink plate and lift the plate off
- Find the BIOS chip on the board and note which corner its silver dot (pin 1) is in
- Open the socket's clamp doors, take the old chip out and fit the replacement with its dot in the same corner
- Refit the heat sink plate, reassemble the camera and boot it
If you'd rather not open the camera
- Send it in and Lynx fits the chip: submit an RMA
Good to know
The BIOS chip on these cameras' ETX board can degrade over time, and a static shock or other stress can reset it to its factory settings, which stops the camera booting. It affects some earlier units of these four models.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.
Related resources
- Camera BIOS Chip Replacement Guide — Guide · PDF