Not capturing desired frames

Two different things look like "the wrong frames": the IdentiLynx starts and stops capturing at the wrong moments, or its video doesn't line up with the photo-finish image. Fix the first with the capture settings and the second with Time Tracking.

How to fix it

If the camera captures at the wrong time

The object detection settings may have been changed from their defaults.

  1. In the Hardware Control window, select the IdentiLynx and open Camera Settings | Capture tab
  2. Check that the Object Detection settings match the defaults:
    • Threshold: 10
    • Active Area Top: 0
    • Active Area Left: 0
    • Active Area Bottom: 100
    • Active Area Right: 100
    • Size: 1
  3. Restore any value that has been changed and test capture again
    • On an IdentiLynx SR or HRS the Threshold works in three bands: LOW is 5 or less, HIGH is 15 or more, and MEDIUM is anything between
  4. Check the Capture Method on the same tab
    • Automatic (IdentiLynx Motion) captures all movement the camera sees while capture is active, and needs no plug-in
    • With any other method, the IdentiLynx captures whenever an EtherLynx camera set to the same method is capturing. The Automatic Capture manual page covers the Object Detection settings

If the video isn't synced with the other cameras

  1. Go to File | Options | Image tab
  2. Set Time Tracking to All Cameras
    • The IdentiLynx then shows the frame that matches the hash line when you click a competitor in the photo-finish image. See the IdentiLynx manual page