Image is pink or wrong color
A pink, purple or gray-reddish image usually means the camera's infrared (IR) filter didn't switch on correctly when the camera booted. On the older IdentiLynx B91 and B95 the IR filter isn't used, but when it is enabled the camera can switch into day/night mode and show a pink image.
How to fix it
On a B91 or B95 IdentiLynx (and IdentiLynx+ or XR+)
- Toggle the IR filter from a web browser, without rebooting the camera. The pink image video shows how
- Find the camera's IP address, enter it in a web browser and go to the camera's Advanced tab
- If the pink comes back every time the camera boots, Lynx can disable the IR filter on the camera so it no longer goes into day/night mode
- If the image is still pink, gray or reddish after toggling the filter, the filter is likely stuck and the camera needs a repair: submit an RMA
- Even switching the image to black and white changes nothing when the filter is stuck
On a different IdentiLynx model
- In the Hardware Control window, right-click the image sidebar and select Adjustments
- Center all of the image adjustment sliders
- If the color is still wrong, the camera needs a repair
If the color is still wrong
Send the camera in to Lynx. Mention in the request if the pink comes back at every boot, so Lynx can disable the IR filter instead.
Send it in for repair
Start an RMA. The portal walks you through what to include and where to ship it.
Related resources
- pink image video — Video · YouTube