MileSplit Live
FinishLynx sends MileSplit Live a clock and results through two scoreboard entries, and MileSplit Live's built-in setup tool writes both into your FinishLynx settings for you. Set it up once, then check three things before each meet.
The latest steps and the script files are in MileSplit's documentation.
How to fix it
Set it up once
- Download the .lss script files from MileSplit's documentation page and copy them into
C:\Lynx. - Close FinishLynx.
- Open MileSplitLive.exe and log in.
- Under Quick Links, click Create FinishLynx Scoreboard.
- Click Browse, select the
lynx.cfgfile on the FinishLynx computer and click OK. - From the drop-down, select the local Ethernet IP address of your timing network.
- Set the ports: the defaults are Results 43550 and Clock 43551.
- Click Create, then open FinishLynx again.
Before each meet
- On the Hytek computer, run the Live Results program.
- Open MileSplit Live, log in, select your meet and click Begin Publishing.
- Once the events load, open the Settings tab and check for a green check mark next to Scoreboard On/Off.
If the board stays blank
- How the board looks is set in MileSplit Live, so display questions go to MileSplit.
- If both entries show Running in Scoreboard | Options… and MileSplit Live shows the green check but nothing reaches the board, Lynx can look at the FinishLynx side with you.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.
Related resources
- MileSplit's documentation — Link