Start from a photo eye or pace light
Yes. FinishLynx can take a start from a photo eye in two ways: the camera's own virtual photo eye, which needs the Automatic Capture Mode (ACM) plug-in, or a physical photocell or pace-light contact wired to the start input. The two headings below are alternatives.
How to fix it
Use the camera's virtual photo eye (ACM plug-in)
This needs the Automatic Capture Mode (ACM) plug-in. Plug-ins run in full FinishLynx, not FinishLynx LITE.
- Open Camera Settings for the timer-enabled camera and click the Inputs tab.
- Set Start Sensor to Internal and click Ok.
- The Threshold and Active Area set in the Photo Eyes section detect the break. The Photo Eye Offset isn't used; the Start Sensor Offset, if set, is.
- To set them from a captured image, draw a box around an athlete and use Image | Set | Photo eye threshold, then Image | Set | Photo eye active area.
- Create a new event and turn capture on. When the virtual photo eye sees a break, FinishLynx adds a start and the running time begins.
- The start shows a "p" (photo eye) in the start list.
The manual's Photo Eye Starts page has the details, and its Automatic Capture page covers the internal photo eye settings.
Wire a physical photocell or pace-light trigger
- Wire the photocell's or pace-light system's contact output to the wired start input: the start cable to the Connection Box or camera, or a RadioLynx transmitter's input cable in place of the start sensor.
- Wired: on the Camera Settings | Inputs tab, set the start sensor to Open (a normally open contact, like an electronic gun).
- RadioLynx: on the RadioLynx tab, set Port to where the receiver is connected and Setup to Start Sensor, and set the Inputs tab start sensor to None.
- Test before the meet: break the beam and check that FinishLynx receives the start.
If you're not sure your sensor's output is compatible, use the button below and give its make and model.
Talk to Lynx Support
Tell the team what you’re seeing and what you’ve already tried. They’ll follow up by email or phone.