Results Production

After receiving a start signal and capturing image, it is finally time to produce results for a race. The process of producing results from a photo-finish image is often referred to as Evaluating or Reading the image. A new operator will take some time to evaluate a race, but a bit of practice will ensure the process can be done efficiently and accurately to provide fully automatic times for the event.

Methods of producing results

There are four basic ways to use the FinishLynx system to produce results:

Method 1Without using any database. With this method the operator simply creates a new event file for each race, captures an image of the finish, evaluates it, and manually records the results of each competitor in the Results Zone.
Method 2At smaller, and slower-paced meets, it is possible to create a “start list” immediately prior to each event.
Evaluating the event is simply a matter of matching each competitor in the start list with their position in the image. When the event file is saved the results are available for manual seeding and scoring of the meet.
Method 3FinishLynx can use LynxPad or even one of several third-party commercial database software packages. Using this method, prior to each event the operator calls up from a previously created file, a list of the competitors for the new event. This is called the “start list” and it will be displayed in the Results Zone before any image is even captured.
Evaluating the event is simply a matter of matching each competitor in the start list with their position in the image. When the event file is saved the results are sent back to the database for automatic scoring, seeding, etc.
It is also possible to use this method to produce fully detailed results without a start list on the basis of a single item of information provided by the operator - lane #, ID #, etc.
Method 4FinishLynx can use a “generic” database set up prior to the meet using “Lynx” data files as detailed in Database Files.
Using this method, prior to each event the operator calls up from a previously created file a list of the competitors for the new event. This is called the “start list” and it will be displayed in the Results Zone before any image is even captured.
Evaluating the event is simply a matter of matching each competitor in the start list with their position in the image. When the event file is saved the results are available for manual seeding and scoring of the meet.
It is also possible to use this method to produce fully detailed results without a start list on the basis of a single item of information provided by the operator - lane #, ID #, etc.

Evaluation steps overview

Here's an overview of the evaluation steps:

Step 1Set the identification method (Lane, License, ID#, or Nothing).
Step 2Record a time:
Position the hash line.
Enter the identification information (if applicable).
Hit Enter.
Step 3(Repeat step 2, 3 for each competitor).
Step 4Save the event.

What's next?

Learn about the different evaluation steps:

  • Identify method FinishLynx can assign times based on different criteria, according to the type of race. See Identification Method for details.
  • Record Times The hash line specifies the time-indexed image frame that defines the time. Recording the time links it to a competitor. See Record Times & Save for details.
  • Save Save the event files includes saving the image and associated results. See Record Times & Save for details.