Scoreboard Operations
When a scoreboard is properly configured and FinishLynx is armed to receive the next start signal, the scoreboard display will automatically start running when a start signal is received. Once the running time is stopped (with a photo eye or manually), results can be sent to the scoreboard.
What are the keyboard shortcuts that control scoreboards?
| Key | Effect |
|---|---|
| Alt-I | Initialize (send initialization sequence to the display). |
| Alt-R | Run (force time to run after it has been stopped by any means). |
| Alt-P | Pause (pause on next photo eye break for Scoreboard, Time Pause seconds). |
| Alt-F | Finish (stop time on next photo eye break). |
| Alt-S | Stop (force time to stop, as for a manual split). |
| Alt-H | Hold Results/Display Results |
| Alt-E | Refresh All (resends all results data to all scoreboards). |
Running Time
How to stop the running time on the next photo eye break?
Photo eye breaks coming from an external or the internal photo eye can be used to stop the running time at the end of a race.
- To Stop the scoreboard on the next break:
- Click Scoreboard | Finish from the Menu Bar, or use the keyboard shortcut Alt-F.
- The Running Time Status will display Finishing until the next photo eye break. When the break is received, the status will change to Finished and the time will stop.
note: If the Auto Break > Finish box is checked in the Scoreboard Options..., the time will pause every time a beam break is received.
How to pause the running time on the next photo eye break?
Photo eye breaks coming from an external or the internal photo eye can be used to pause the running time to show a split time.
- To Pause the scoreboard on the next break:
- Click Scoreboard | Pause from the Menu Bar, or use the keyboard shortcut Alt-P.
- The Running Time Status will display Pausing until the next photo eye break. When the break is received, the status will change to Paused and the time will stop for the Pause Time set in the Scoreboard Options.
note: If the Auto Break > Pause box is checked in the Scoreboard Options..., the time will pause every time a beam break is received.
How to manually stop the running time?
When a photo eye is not available to pause or stop the running time, the operator can do this manually.
- To stop the running time:
- Click Scoreboard | Stop from the Menu Bar, or use the keyboard shortcut Alt-S.
- The Running Time Status will display Stopped and the time will stop to the nearest 1/10th of a second.
tip: This function can also be useful if the operator forgot to prepare the scoreboard to stop with the next beam break and would like the scoreboard to show results.
How to restart the running time manually?
If an unexpected photo eye break stops the clock or if it was manually stopped for a split, the operator can force the running time to start again.
- To restart the running time:
- Click Scoreboard | Run from the Menu Bar, or use the keyboard shortcut Alt-R.
How to select which photo eyes are active?
You can select which photo eyes are active through a sub-menu in the Scoreboard drop-down menu.
- To access the photo eye sub-menu:
- Click Scoreboard from the Menu Bar and then click to select Photo eyes.
- Click to select which photo eyes in the list you want to deactivate or re-activate.
note: Each time FinishLynx is run, all photo eyes begin as active.
How to stop the on-screen running time box?
There is an option in the Scoreboard drop-down menu, Stop on-screen time, that, if selected, causes the on-screen running time to stop when the scoreboard is in either Paused or Finished mode.
- To access Stop on-screen time:
- Click Scoreboard from the Menu Bar.
- Click to select Stop on-screen time.
How to use advanced running time controls?
There are new options to give the user additional flexibility and control over the running time sent to scoreboards.
Figure: Operations
Four options allow the scoreboard to ignore any or all of the following user commands:
- Run, Pause, Finish and Stop.
The last two options allow mapping the Pause time to Finish function and vice versa.
note: These options can be set independently for each scoreboard. For example, one scoreboard could stop at the finish of a race, while another continues to show the running time by selecting Ignore Finish.
Results
How to display results?
If Results are set to Auto in the Scoreboard Options, data from the Results Board will automatically appear on scoreboards whenever the Running Time Status is Finished or Stopped.
If Results are set to Manual in the Scoreboard options, data from the Results Board will appear on scoreboard whenever the Running Time Status is Finished or Stopped AND the operator refreshes the results.
- To refresh results:
- Click Scoreboard | Refresh All from the Menu Bar, or use the keyboard shortcut Alt-E.
- Alternatively, the operator can select a specific scoreboard to refresh:
- Click Scoreboard | Refresh | [Select scoreboard].
How to use a scoreboard with multiple open events?
If only one Event window is open, FinishLynx will display on the scoreboard the information coming from that Event. However there may be cases when several Events are open at the same time and the operator needs to choose which information to display. This will usually happen when an operator needs to open a new Event before completing the evaluation of the previous one.
- To “connect” the scoreboard to the new Event before closing a previous one, the FinishLynx operator should:
- Click Window from the Menu Bar and select the <Event window> that they wish to display information about to bring it to the front (or select it from the OPEN EVENT LISTING).
- Click the Scoreboard | Display current event from the Menu Bar.
- The operator can then bring the desired Event window back to the front. The scoreboard will continue to display the information from the previously selected Event window.
note: The OPEN EVENT LISTING indicates the Event currently connected to a scoreboard by showing the letter 's' next to the event name.
How to hold results?
FinishLynx allows the operator to pause the results output to scoreboards. This can be used, for example, to prevent any results from being displayed on the scoreboard until they have been certified or double-checked by a race official.
- To pause the results output to scoreboards:
- Click Scoreboard from the main menu.
- Click to select Hold results from the drop-down menu.
- Once results have been paused, and you want to then send results, click Scoreboard | Display results.
Image
How to select an image to show on ResulTV video display objects?
- To display photo-finish images on ResulTV:
- Configure FinishLynx and ResulTV with compatible scripts (ResulTV_Video_*.lss & Video Display.rss)
- Draw a box to select the portion of image of interest.
- Click Export... See Images and Videos Export Function for more information.
- Save the image as a jpg to the ResulTV folder using the EEE-R-HH.jpg default name. Note: To change the location to save images, change the path in the ResulTV_Video script. See ResulTV_Video_Example.lss for more information.
- Go to Scoreboard|Show Image (ResulTV).
- Click Scoreboard|Show Image (ResulTV) to toggle the image on/off.
tip: Advanced - You can skip the Export... process by using the Set Scoreboard Image function if you have defined a filename in +Scoreboards\SetImageFile (Other Settings). If set, FinishLynx will save a copy of the image selected to the defined location. This filename can be relative (to the bitmap directory) or absolute (beginning with "\" or "<drive>:". If the actual name is left blank then the standard LIF name is inserted. For example, you can specify "D:\Image.jpg" to write the same file every time or "D:.jpg" to have the LIF name inserted each time. To work automatically with default ResulTV_Video_*.lss scripts, the file name should specify the ResulTV folder and leave the file name blank (c:\ResulTV.jpg if ResulTV is on the same PC as FinishLynx).
Message
How to display a text message on a scoreboard?
Scoreboards that accept both numbers and letters can display a message in addition to running time and results.
- To send a message to a scoreboard:
- Click Scoreboard | Edit Message...
- Enter the text to be sent.
- Click Send.
- Click Ok.
note: Once a message has been entered, it can be resent by simply clicking Scoreboard | Send Message from the Menu Board.
note: Uncheck the Use fixed width font to send a scoreboard message in a language that does not support fixed width fonts.