Scoreboard Options
Options - Scoreboard Tab
Figure: Scoreboard
See the Scoreboards section for details on how to configure and operate FinishLynx with a scoreboard.
Scoreboard/Status (list)
Displays the name and status of all scoreboard objects. All options apply to the currently selected scoreboard in this list.
- Not loaded Requires FinishLynx to be restarted.
- Not Running Serial Port: is set to <none>.
- Not Connected Serial Port is set, but TCP connection not established. Applies to Network (connect) or (listen).
- Running Sending data through the selected port.
Name: (free-text)
As any number of scoreboards can be connected, individual scoreboards can be assigned names to aid in identification (running time, results, infield, etc.), so that the operator can determine what information is being sent to each connected scoreboard.
Script: (drop-down)
When a scoreboard is added by clicking on the New button a list of available driver files, called Lynx Scoreboard Scripts (or .lss), will appear in this drop-down window. To select one simply click on it with the mouse. Scripts for connected scoreboards can be changed by clicking on the Name* of the new file.
note: Changes to this value only take place the next time FinishLynx is run.
Serial Port: (drop-down)
When a scoreboard is connected to FinishLynx, the port used and the data communication configuration need to be set here. Follow the instructions that accompany your scoreboard. See Port Settings for more information.
Pause Time: (free-text)
The number of seconds that you wish to leave the split time on the scoreboard before it returns to displaying the running time.
Offset: (free-text)
This setting reflects the difference between the display clock reading and the time triggered by a photo eye. Values are in seconds and can be either negative (to subtract time from the clock display), or positive (to add time to the clock display).
Auto Break (checkboxes)
With this setting and a connected photo eye, you can control whether the scoreboard automatically displays lap time and finish times.
- Unchecked The Auto Break feature is disabled.
- Pause Every photo eye beam break will be displayed for the pause time before returning to the running time display.
- if capturing Auto Break Pause will only occur if manual or timed capture are in action.
- Finish A photo eye beam break will stop the scoreboard clock.
- if capturing Auto Break Finish will only occur if manual or timed capture are in action.
Paging: (free-text)
Check this box to send scrolling pages of data to the scoreboard.
- Size Reflects the number of available lines on your scoreboard (single line = 1, etc.).
- Max Defines the maximum number of results to be sent before looping back to first place.
- Time Shows the number of seconds that each page of the display will remain visible before scrolling to the next page.
Time Precision: (drop-down)
Sets the precision of the times being sent to the selected scoreboard. Any of the following values can be selected:
- On Screen
- Seconds
- Fifths
- Tenths
- Hundredths
- Thousandths
- Ten Thousandths
Suppress Minute: (checkbox)
Checking this option will display all times less than 100 seconds (1 minute 40 seconds) in whole seconds. When selected, a time of 1:07.67 will show as 67.67.