Event

Get Info...

Clicking here will bring up the Camera Settings dialog.

Arm

This function arms the selected event to receive the next start. See Arming, Re-Arming & Disarming for details.

tip: Use CTRL-A as a keyboard shortcut.

Disarm

This function will disarm an event that is currently armed. See Arming, Re-Arming & Disarming for details.

tip: Can be used in Time Trial mode after receiving the start of the last participant.

Image start

This function allows a start to be created based on the current hash line position on the FinishLynx image. See Image Starts for details.

note: If the current event is capturable, then the start is placed in the main list of starts and can be used like any other start. This includes the ability to place it into a different event.

Manual start

Selecting this function will call up the Manual Start dialog box as described in Manual Starts.

TOD start...

This function allows the user to create a start with a defined time of day (TOD). See Time of Day Starts for details.

Select start...

Selecting this function will open a dialog with all starts stored with this event. See Saved Starts for details.

Set current start

In Time Trial Mode, this function allows the user to set the current start for the purposes of on-screen running time, scoreboard running time, and LapTime event generation.

Manual Wind

Selecting this function will trigger a wind reading of the duration set in the Manual Wind settings.

Select Wind

The operator can choose which wind gauge reading is needed for the current event by clicking here and selecting the desired reading from the list in the Select Wind pop-up dialog.

Toggle Capture

This function allows the user to enable or disable capture for all EtherLynx cameras.

Advance Capture

When the Multiple-Split Interface (MSI) Plug-in is installed, selecting this function will move the capture capability to the next correctly configured split location.

Set Capture

When the Multiple-Split Interface (MSI) Plug-in is installed, selecting this function will move the capture capability to the split location which is currently selected (highlighted) in the Information Zone.

Add Split Location

When the Multiple-Split Interface (MSI) Plug-in is installed, selecting this funtion adds a new split location to the currently active event.

Add Camera

When the Multiple-Split Interface (MSI) Plug-in is installed, selecting this function presents a dialog of available cameras which can be added to the current split location.

Delete Object

When the Multiple-Split Interface (MSI) Plug-in is installed, selecting this function deletes the selected split location, or camera, which is currently selected (highlighted) in the Information Zone

Synchronize TOD...

Selecting this function allows the user to synchronize the EtherLynx camera time of day reference to another source. See Additional Start Features for details.

Zero gun test...

Selecting this function opens a dialog to be used to perform a zero gun test.

Options... (Event)

Opens the Options dialog Event tab.