File

Figure: File

New

This will create a new Event Window. Any attached cameras will be automatically connected to the system with the settings currently found in the Camera Settings. The software will arm the system and turn on the capture button automatically, if manual capture is used.

If Single Event Mode is currently selected in the Event | Options… dialog box, then opening a new event will automatically close the currently open window and prompt the user to save any unsaved changes.

Open...

This will bring up the standard file dialog box and allow you to choose a previously saved race to open.

Open Recent...

A dialog opens that lists the events in the current directory, and allows you to sort by:

  • Name [Name (A to Z) or Name (Z to A)]
  • Creation time [Created (Oldest) or Created (Newest)], or
  • Modification time [Changed (Oldest) or Changed (Newest)].

note: The current directory is either the Event Directory: (Event | Options) or the last directory that an event was either opened in, using File | Open, or saved in, using File | Save As.

Close Window

This will close only the active window that is at the front. It has the same effect as clicking in the close icon for that window.

note: If you attempt to close a modified event window before saving it, you will be prompted with an alert.

Save

This will bring up the standard Save File dialog and allow you to name the file. The name you give the file will be used to title results and image printouts.

Save As...

This will bring up the standard Save File dialog and allow you to save the current event to a different file than it is currently stored in.

Save LIF

This function allows the user to save only the information in the Results Zone to a Lynx Interface File (LIF) used by a competition management database software, without saving the FinishLynx image.

note: The LIF file is always saved, with the FinishLynx image, when the Save or Save As... functions are used.

Reload

When an event is opened in Reader mode, the File | Reload command is enabled. Use this feature to load the latest information that the capture computer has stored in the .evn file. By clicking File | Reload, you save, close, and reopen the event.

tip: This feature is useful when you are using Reader mode and Time Trial mode together, because starts typically come in after the Reader mode enabled computer has opened the event.

Previous Event

If a database is being used, selecting this option will open the Event that is immediately prior to the last opened event in the schedule.

If Single Event Mode is currently selected in the Event | Options… dialog box, then opening a new event will automatically close the currently open window and prompt the user to save any unsaved changes.

GoTo Event

If a database is being used, selecting this option will call up a dialog box that will enable the operator to choose an event from the schedule and open it.

If Single Event Mode is currently selected in the Event | Options… dialog box, then opening a new event will automatically close the currently open window and prompt the user to save any unsaved changes.

Next event

If a database is being used, selecting this option will open the Event that is immediately after the last opened event in the schedule.

If Single Event Mode is currently selected in the File | Options… dialog box, then opening a new event will automatically close the currently open window and prompt the user to save any unsaved changes.

Backup Events

An operator can set a Backup Directory or drive in the File | Options… drop-down dialog box as described in Backing Up. Choosing this option will cause the software to write a copy of all the files in the Event Directory that have changed since the software was last opened to be written to the backup directory.

Create Profiles...

Opens a dialog to enter the name of a Profile.

Options... (File)

Opens the Options dialog General tab.

Exit

This will exit the program, and prompt you to save any changes in events that you have not saved since they were last changed.