LapTime Options
Options - LapTime
Figure: LapTime
See LapTime Module for details on how to configure and operate FinishLynx with a LapTime device.
Note
| NOTE: All options above the horizontal line apply only to the selected LapTime object. Global options appear below. |
|---|
Scoreboard/Status (list)
Displays the name and status of all LapTime objects.
- Not loaded Requires FinishLynx to be restarted.
- Not Running Serial Port: is set to <none>.
- Not Connected Serial Port is set, but TCP connection not established. Applies to Network (connect) or (listen).
- Running Sending and/or listening for data through the selected port.
Name: (free-text)
As any number of LapTime devices can be connected, individual devices can be assigned names to aid in identification (split 1, finish, etc.).
Device (drop-down)
When the LapTime (LT) Plug-in has been installed, the operator will have the option to select the LapTime Module to be used. Without the plug-in, only From Image is available.
Serial Port: (drop-down)
When a scoreboard is connected to FinishLynx, the port used and the data communication configuration need to be set here. Follow the instructions that accompany your scoreboard. See Port Settings for more information.
Time Offset: (free-text)
This offset can be used to adjust the times reported by an external LapTime device to match the official times produced by an EtherLynx camera.
- Time Offset: is added to split times for the selected device.
Masks: (free-text)
Sets time parameters within which FinishLynx will ignore readings from a LapTime device.
- Start Sets the time after the start signal FinishLynx will begin accepting splits.
- Duplicate Sets the minimum time between readings for the same tag or transponder.
Results: Key (drop-down)
Defines which Results Zone field will be matched to the Id received from the LapTime device.
Create Results (checkbox)
When checked, FinishLynx will create a new result object in the Results Board if an Id cannot be associated with an existing key.
Fill in place (checkbox)
When checked, the Place field in the Results Board will be populated with the ranking at the leaders split.
Map File: (path)
Allows the user to browse and select a *.txt file to be used to translate the tag ID to the results key.