Recharge the ReacTime Championship System
After the competition, you should recharge your Block Sensors and Command Center if you were running the ReacTime Championship System with battery power. You can do this using the System Charger that came with your ReacTime Championship System (see Figure 41).
- a. Turn OFF all Block Sensors and the Command Center.
- b. Plug the System Charger power supply into an electrical outlet.
- c. Connect all Block Sensors and the Command Center to the System Charger.
- d. Wait at least four hours until all Block Sensors and the Command Center are completely charged. (You will know when a unit is fully charged when you disconnect it from the System Charger and turn it on, and the battery icon in the top right corner of the LCD is completely shaded.)
Figure: Recharge the ReacTime Championship System
Figure 41: System Charger connections