Open a New ReacTime Event (Race)
Run the ReacTime Championship Software if you have not done so already. If you are using the ReacTime Championship Software to automatically import and display a start list (list of competitors in an event), follow the instructions in a. If you are not using the software to automatically import and display a start list, skip to the instructions in b.
- a. Import and display a start list
Use the sample data that came with your ReacTime Championship Software to practice the following steps.
- a. Click the Choose an Event from the Schedule icon (see Figure 42). The Go To Event window appears.
- b. Click the Load Schedule button. Click the drop-down list to display the schedule you just loaded.
- c. Click on the event that is up next from the list [for example, 100 Meter Dash Men (1,3,1)] and then click OK.
- d. The event you selected appears with a blank ReacTime Championship Chart (see Figure 43).
Figure: Open a New ReacTime Event (Race)
- A. Menu Bar
- B. Results Zone
- C. Chart Zone
Figure 43: Sample event
note: Load the previous event from the event schedule by clicking the Load the Previous
Event…icon. Load the next event from the event schedule by clicking the Load the Next Event…icon. (See Figure 42.)
- b. Without importing and displaying a start list
- a. If you are not importing data from a start list, click on the Create a New Event icon (see Figure 42). Or, you can select File from the menu bar and choose New. A blank event with a blank ReacTime Championship Chart appears on your screen (see Figure 44).
Figure: Open a New ReacTime Event (Race)
Figure 44: Blank event
- b. Manually enter competitor information in the Results Zone. Click to highlight each lane and press the Tab key to navigate from one column to the next.
note: Only 7 lanes display at a time in the Results Zone. Use the scroll bar at the far right of the Results Zone to display more lanes. Also, the data in the Reaction Time and Power fields is supplied by the Block Sensor and is therefore not editable.
- c. Save the event by clicking the Save the Selected Event icon.