Configure ReacTime Championship Software
- a. Connect the Serial Cable you originally received with the ReacTime Training System between the Command Center and an available COM port on the back of your computer. Then, turn on your computer. (Note: For a complete Command Center diagram, please refer to Figure 38.)
- b. Start the ReacTime Championship Software by selecting it from the Programs list in the Windows Start menu. A screen appears containing the ReacTime Training System Software menu bar. The menu bar contains the icons shown in Figure 42.
- Create a New Event
Figure: Configure ReacTime Championship Software
- Open an Event
Figure: Configure ReacTime Championship Software
- Save the Selected Event
Figure: Configure ReacTime Championship Software
- Load the Previous Event from the Schedule
Figure: Configure ReacTime Championship Software
- Choose an Event in the Schedule
Figure: Configure ReacTime Championship Software
- Load the Next Event from the Schedule
Figure: Configure ReacTime Championship Software
Figure 42: ReacTime Championship menu bar icons
- c. Configure your computer’s COM port. Click Hardware from the menu bar and choose
Options. The Options window appears.
- d. Click the Serial tab.
- e. From the Serial Port drop-down list, select the COM port number the Serial Cable is attached to on your computer.
- f. With the Options window open, configure the software for the number of Block Sensors connected to the Command Center. Click the Results tab and select the number from the Default Number of Lanes drop-down list.
- g. If you are downloading start lists of competitors using a schedule of events, configure the software to find the necessary data files. With the Options window open, click the Database tab. Click the Browse button to navigate to and select the input and output directories. Note: ReacTime Championship Software comes with a sample event schedule and list of competitors. If you want to use this sample data to practice the next steps with, leave the input and output directories at their default settings (they will resemble C:\REACTIME\CHAMPIONSHIP).
- h. (Optional) To send reaction times to a scoreboard after a race, you must first configure the software’s scoreboard settings to work with the scoreboard you are using. Click Scoreboard | Options from the menu bar and either select or type the appropriate information about your scoreboard. You will need to know the following information:
- scoreboard script (1-line or 2-line)
- scoreboard name
- code set (single byte, Unicode, or native)
- baud rate, data bits, stop bits and parity