Install the ReacTime Championship Software
All ReacTime Championship Systems come with a copy of the ReacTime Championship Software. To use the ReacTime Championship Software to its full capacity (downloading and analyzing trials from the Block Sensor), you must obtain a serial number. If you do not have a serial number, you may purchase one by calling a Lynx sales associate at 1-800-989-LYNX.
If you elect to not purchase a serial number, you can run the ReacTime Championship Software in demo mode, which you can use to update the Block Sensor and Command Center firmware and customize the software’s language files, but cannot download and analyze trials from the Block Sensor.
If you have already installed ReacTime Championship Software, skip to Step 2:. Otherwise, follow these instructions.
- a. Click the Windows Start Menu and choose Settings | Control Panel. The Control Panel screen appears.
- b. Double-click Add/Remove Programs. The Add/Remove Programs Properties window appears.
- c. Click the Install button.
- d. Insert Disk 1 and then follow the instructions on the screen until you arrive at the ReacTime Championship-InstallShield Wizard window.
- e. Type your name and company name (if applicable) in the text boxes provided.
- If you have purchased a license, type the serial number (found on the floppy disk label) in the Serial text box when prompted and then click Next.
- If you elect to not purchase a license, leave the Serial text box blank and then click
Next.
- f. Insert Disk 2 when prompted and follow the instructions on the screen.
- g. Insert Disk 3 when prompted and follow the instructions on the screen to complete the installation.
- h. If you have installed a complete version of the ReacTime Championship Software (using a serial number), go on to Step 2:
- i. If you have not installed a complete version of the ReacTime Training Software, run the ReacTime Training Software by selecting it from the Programs list in your Windows Start Menu. When the Enter Serial Number window appears, click the Demo Mode button. Skip to Step 9: and Step 10: to use the software’s demo mode to update your Block Sensor and Command Center firmware and the software’s language files.