Championship System Software: overview
The Championship Software is used to display athletes’ reaction times and to send ReacTime data to a FinishLynx system. Reaction times are displayed in charts that show an athlete’s reaction in relation to the gun and the legal limit. Reaction time charts can be printed. Generally, it is the responsibility of the Recall Starter or the Starter’s Assistant to operate the software during a competition.
Before you begin
Before following the instructions in this chapter, you need:
- at least one ReacTime Unit properly mounted to a starting block.
- an IBM compatible PC.
- ReacTime Championship Software (either already installed onto your computer, or in three floppy disks, or via the Lynx website. If you are downloading the software via the Lynx website, call customer service at 1-800-989-LYNX to obtain a serial number before proceeding with these instructions).
- the Serial Cable originally provided with your ReacTime Championship System.
- An available COM port to connect the Serial Cable to the back of your computer. Later in this document you will be instructed to use the software to configure this COM port.