Practice Starts
Now that you have properly mounted, connected, and configured your ReacTime Training System, you are now ready to practice using it with starts out of the blocks. The instructions that follow can be used by a coach training an athlete (“Coach”) or by an athlete training alone (“Athlete”).
- c. Coach
- a. Make sure the Block Sensor is turned on when the athlete settles into the starting blocks.
- b. Push the Start Button or the Start key to initiate the Virtual Starter. If you are using the randomized start feature, press once to trigger the entire sequence. If you are using the manually controlled start feature, press the button or key each time you want to trigger the next command or gun sound. After the gun sounds and the athlete leaves the starting blocks, the LCD displays various information about the start, called a trial. Continue to Step 5: to learn how to interpret trial data.
Athlete
We recommend that you use the randomized Virtual Starter feature if you are training alone.
- a. Make sure you have a Start Button connected to the Block Sensor.
- b. Make sure the Block Sensor is turned on before you settle into the blocks.
- c. Press the Start Button once to initialize the Virtual Starter. You will hear the “On Your Marks” and “Set” commands. After the electronic gun sounds and you leave the starting blocks, the Block Sensor LCD displays various information about your start, called a trial. Continue to Step 5: to learn how to interpret trial data.