Use Randomized or Manually Controlled Intervals
The Virtual Starter feature is a recording of the "On your marks," "Set," and simulated gun sound sequence you trigger by pressing the Start Button or the Start key. By default, the Virtual Starter randomly varies the intervals between commands. If you are satisfied with using a randomly varied setting, skip to Step 4:.
If you want to manually control the intervals between commands, follow the steps below. (Note: To learn more about the Block Sensor's other menu options, including how to change the randomized interval settings, please refer to Appendix A at the back of this manual.)
- a. Turn on the Block Sensor. The ReacTime | Ready to Start screen appears.
- b. Press the Menu key once. Use the up or down arrow keys to scroll through the four menus until you arrive at the Main Menu | Training screen. Press the Menu key again.
- c. Scroll through the Training Menu sub-menus using the up or down arrow keys until you arrive at the Training Menu | Intervals screen. Press the Menu key once.
- d. Scroll to the Intervals Menu | Ready->Set Min sub-menu using the up or down arrow keys. Press the Menu key again. The Ready->Set Min | 6.0 screen appears.
- e. Press and hold the down arrow key until the setting changes to Manual.
- f. Press the Delete key once to go back to the Intervals Menu | Ready->Set Min screen. Press the down arrow key twice to view the Intervals Menu | Set ->Gun Min screen. Press the Menu key once. The Set->Gun Min | 2.0 screen appears.
- g. Press and hold the down arrow key until the setting changes to Manual.
- h. Press the Menu key to arrive at the ReacTime | Ready to Start screen. Now you are ready to practice some starts.