Work with Trials in the Software
Follow the instructions in this section to import trial data from your Block Sensor or work with the temporary workout that came with your software.
- a. Turn on the Block Sensor.
- b. Practice some trial starts so that you have at least three stored in the Block Sensor.
note: If you cannot practice starts at this time, use the temporary workout that came with your ReacTime Training Software. To access the temporary workout, click the Open
Workout icon. The Open window appears with a file called, "MondaysWorkout.rtw".
Double-click this file and skip to Step 4:
- c. Connect the Serial Cable to your computer COM port, if you have not already done so.
- d. Click the New Workout icon. A screen appears containing a blank chart (see Figure 31).
Figure: Work with Trials in the Software
- A. Menu Bar
- B. Results Zone
- C. Chart Zone
- D. Add Trial
- E. Delete Trial
- F. Print Trial
- G. Print Chart
- H. Maximize Chart
- I. Show/Hide ‘Set’ Time Line
- J. Show/Hide ‘Gun’ Time Line
- K. Show/Hide ‘Legal’ Time Line
- L. Show/Hide ‘Reaction’ Time Line
Figure 31: New Workout screen
- e. Click the Add Trial icon. The Select Trial box appears containing the trials you just recorded on the Block Sensor.
- f. Highlight the trial you want to appear on your screen and then click the Download button. If you want to download all of the trials from the Block Sensor, click Download All. The trials you just recorded on the Block Sensor appear on the screen.
note: If you receive the error, "Serial Connection Receive Timeout," check the connection of the serial connection to the Block Sensor and make sure the Block Sensor is turned on. Then highlight the trial you want to download again and click the Download button.