Step 2: Configure ResulTV to receive data

  1. Click File from the Menu bar and select Options…. The Options dialog appears. Go to the Sources tab.
  2. From the Script: drop-down list, select FinishLynx.rss.
  3. If your ResulTV and FinishLynx computers are connected:
    • Via serial using a DB9 null modem cable, select the COM port the cable is connected to on the ResulTV computer from the Serial Port: drop-down list. Then, click OK.
    • If you are connecting the computers over a network, select Network (listen) from the Serial Port: drop-down list. Then, type a number greater than 1024 in the Port text box and click OK.
  4. To change the status of the source from “Not Loaded” to “Running” you will need to close and reopen ResulTV.

tip: You can display the ResulTV configuration screen on a computer and send the ResulTV display to another device (see Displaying ResulTV on multiple monitors), such as a desktop monitor, scan converter, or projector.