Step 3: Configure FinishLynx to send data to ResulTV

  1. Run FinishLynx.
  2. Click Scoreboard | Options…. The Options dialog appears.
  3. Click the New button to create a new scoreboard source.
  4. From the Script: drop-down list, select ResulTV.lss.
    • If you are connecting the ResulTV and FinishLynx computers serially using a DB9 null modem cable, select the COM port the cable is connected to on the FinishLynx computer from the Serial Port: drop-down list. Then, click OK.
    • If you are connecting the computers over a network: a) Select Network (connect) from the Serial Port: drop-down list. b) Type the same Port number you assigned to the ResulTV computer in the previous step. c) In the IP Address field type the IP Address of the ResulTV computer and then click OK.
  5. To change the status of the scoreboard you just created from “Not Loaded” to “Running” you will need to close and reopen FinishLynx.