Automatic switching of display screens
ResulTV can receive commands from FinishLynx that cause the layout (RTV file) displayed to automatically switch. Specifically, you can create four different ResulTV layouts (start lists, results, running time, and messages), and display the appropriate layout on the ResulTV screen depending on data sent by FinishLynx without the use of an extra operator.
Before you begin
You must use the ResulTV.lss scoreboard script in FinishLynx.
Basic instructions
- Start at the ResulTV configuration screen.
- Create four new layouts, or RTV files, and assign each layout one of these names, associated with the type of information it displays:
- Starts.rtv for a start list display
- Results.rtv for a results display
- Time.rtv for a running time display, and
- Message.rtv for a message display.
Example #1
In this example, an auto-switching occurs between the running time and results displays.
- In ResulTV, open two layouts you created earlier: Results.rtv and Time.rtv.
- In FinishLynx, set the scoreboard options to Running Time | Normal and Results | Auto.
- When the running time in FinishLynx is armed or running, the Time.rtv layout, or running time, is automatically displayed on the screen.
- When the running time is stopped and the FinishLynx operator starts evaluating the FinishLynx image, ResulTV automatically changes to the Results.rtv layout and the results are displayed.
note: The running time must be stopped in order for FinishLynx to send results to the display. To stop the clock, simply Scoreboard | Stop (Alt + S) or use a photo-eye. See the FinishLynx User’s Manual to configure a photo-eye or a FinishLynx camera using Automatic Capture Mode.
Example #2
In this example, auto-switching occurs between the start list, results, and a scoreboard message.
- In ResulTV, open three layouts you created earlier: Starts.rtv, Results.rtv and Message.rtv.
- In FinishLynx, set the scoreboard options to Running Time | Off and Results | Auto.
- When the FinishLynx operator opens a new event from the database, the Starts.rtv, or start list, is displayed in ResulTV.
- When the FinishLynx operator begins evaluating the FinishLynx image, the results appear in ResulTV.
- If a scoreboard message is sent, the Message.rtv layout causes the message to be displayed in ResulTV.