Manual and Automatic triggering of text and bitmap objects

Layout objects (both text and bitmap) can be triggered either manually by keyboard events or automatically through remote commands that appear in the data stream. A trigger is a string of characters (up to 15 and not case sensitive). When using a data stream, any string can be used. In order to have the ability to manually trigger the object, the trigger value must be able to be generated by the keyboard.

Any normal key (letter, number, punctuation, etc.) generates a trigger with that single character as its value. Holding the Shift, Control, or Alt keys when hitting a normal key will prepend a “S+”, “C+”, or “A+” to the trigger. You can use one or more of these keys (in that order). Hitting the Function key generates the trigger “Fn”, where n is the function key number. The Function keys can also be modified by Shift, Control, and/or Alt. Note: the display screen must be active when manually triggering an object, not the configuration screen.

A time can also be entered in the Time: field, in seconds, if you want the triggered object to only appear for a period of time and then disappear. If you wish for it to remain visible indefinitely, leave the Time: field blank. The Trigger: and Time: fields can be found by going into an object’s Properties and into the Basic tab.

Figure: Manual and Automatic triggering of text and bitmap objects

Examples:

note: Be careful not to choose a trigger that is also a menu accelerator, as the menu will capture the event and it will not make it to the display window to be used as a trigger.

Sending a trigger through the data stream uses the same mechanism as the automatic layout switching. The Command is “Trigger”, the Name is that of the string being used as the trigger, and the Action can be “On”, “Off”, or “Toggle”, each corresponding with how they wish to affect the state of the object they are triggering.

An active example of this feature can be found in the script ResulTV.lss in the TimeStopped section:

Figure: Manual and Automatic triggering of text and bitmap objects

In this case, the Trigger of F1 is being used to turn on an object that is in the Time.rtv layout in ResulTV. The object’s corresponding properties in ResulTV can be seen here:

Figure: Manual and Automatic triggering of text and bitmap objects

note: This object can also be triggered manually by hitting the F1 key since the trigger used in the data stream is also a normal key.