Data source basics

Creating a new data source

You must create a new data source or modify an existing one so ResulTV knows how and from where it is receiving data.

To create a data source

  1. Make sure you are at the ResulTV configuration screen (see ResulTV configuration screen). Click File | Options. The Options dialog box appears.
  2. Click the New button.
  3. From the Script: drop-down list:
    • select FinishLynx.rss for data coming from FinishLynx.
    • select Hytek.rss for data coming from Hy-Tek Meet Manager for Track and Field.
    • select HytekSwim.rss for data coming from Hy-Tek Meet Manager for Swimming.
    • select MeetPro.rss for data coming from MeetPro Meet Manager.
  4. The default source name, Source, appears in the Name: text field. Type a new name if you want. This is helpful if you want to keep track of data coming to ResulTV from multiple sources.
  5. From the Serial Port: drop-down list:
    • For data sources connected to the ResulTV computer via a null modem cable (see "Using ResulTV over a serial connection"), select the correct COM port.
    • For data sources connected to the ResulTV computer via wired or wireless Ethernet (see "Using ResulTV over a network"), select Network (listen). In The Port: field, enter the same Port number that the FinishLynx computer's scoreboard network (connect) port is set to.
  6. Click OK. You have now created a data source within ResulTV.
  7. Close ResulTV and then restart the application.
  8. After restarting ResulTV, continue to the instructions for configuring the FinishLynx (see "Sending a start list and results from FinishLynx") or Hy-Tek Meet Manager (see "Sending a start list from Meet Manager for Track and Field for Windows") computer to send data to ResulTV.

Deleting a data source

  1. Start at the ResulTV configuration screen (see ResulTV configuration screen) and click File | Options.
  2. Go to the Sources tab. Click to highlight a source you created earlier in the Source...Status text field.
  3. Click the Delete button.
  4. Restart ResulTV. When you return to the Options dialog, the data source you just deleted is gone.

Which RSS file do I select?

Important! When using ResulTV with FinishLynx or Hy-Tek Meet Manager, you must select the correct RSS file when configuring the data source!

Select this script in ResulTV...With this script and/or program...
FinishLynx.rssResulTV.lss
Hytek.rssHy-Tek Meet Manager for Track and Field
HytekSwim.rssHy-Tek Meet Manager for Swimming
MeetPro.rssMeetPro Meet Manager

Working with multiple data sources

You can configure ResulTV to get data from more than one data source. For example, you can use ResulTV to display running time (see "Display running time and results") coming from the FinishLynx computer and results coming from the Meet Manager computer.

  1. Start at the ResulTV configuration screen.
  2. Click File | Options. The Options dialog appears.
  3. Go to the Sources tab. Click the New button to create a new source, and repeat the appropriate steps in “Creating a new data source.”