FinishLynx as a data source
Configuring ResulTV for use with FinishLynx
- Click File | Options from the Menu bar on the ResulTV configuration screen. The Options dialog appears.
- Go to the Sources tab. Click the New button.
- Tab to the Script: drop-down list and select FinishLynx.rss.
- Tab to the Name: text field and type a new name for your data source, for example, FinishLynx Primary.
- Tab to the Serial Port: drop-down list and configure the serial or network settings (see "Setting Up the Computers").
- Click OK and then exit and restart ResulTV. ResulTV is now configured to receive data from the FinishLynx computer.
Configuring FinishLynx for use with ResulTV
Pre-requisites
If you are configuring the FinishLynx computer to send data to the ResulTV computer, make sure that one of the following statements is true:
- The FinishLynx computer is connected to the ResulTV computer using a null modem cable (see "Using ResulTV over a serial connection") via the DB9 serial (COM) ports.
- The FinishLynx computer and the ResulTV computer are on the same wired or wireless Ethernet network (see "Using ResulTV over a network").
Instructions
- Run FinishLynx.
- Click Scoreboard I Options. The Options dialog appears.
- Click the New button to create a new scoreboard source.
- Select ResulTV.lss from the Script: drop-down list.
- Tab to the Name: text field and type a new name for the scoreboard FinishLynx is sending data to, if desired.
- Click the Serial Port: drop-down list.
- If you are sending data from FinishLynx to ResulTV over a serial connection, select the COM port through which the FinishLynx computer is connected to the ResulTV computer. Leave the Baud, Data Bits, Parity, and Stop Bits settings at their default values (9600, 8, None, 1).
- If you are sending data from FinishLynx to ResulTV over a network, select Network (connect). In the port: field type the port number you set the ResulTV computer to, and in the IP Address field type the IP address of the ResulTV computer.
- Configure the rest of the scoreboard settings as desired. Refer to the FinishLynx Operator's Manual for complete instructions.
- Click OK and restart FinishLynx. FinishLynx is now ready to send data to the ResulTV computer.