"No cameras enabled" when capturing

"No cameras enabled" means no camera is set to capture. The camera list in the Hardware Control window shows each camera's Capture setting, Yes or No, and at least one camera needs Yes. Alignment doesn't need it, which is why 2-D and 1-D alignment still work.

How to fix it

Turn capture on for the camera

  1. Open the Hardware Control window (the first screen when FinishLynx opens, or the Window menu)
  2. In the camera list, look at the camera's Capture column
  3. Right-click or double-click it to switch it to Yes. There's no need to open Camera Settings
  4. Go back to the event and capture again

Switching cameras between events

  1. The same column is how you choose which cameras capture for each event, for example a sprint finish camera and an oval finish camera at one meet
  2. Before each event, set the cameras you want to Yes and the others to No. With none set to Yes, you get the "no cameras enabled" error
  3. The cameras active for the event are listed in the event's Information Zone

The Multiple Camera Systems page of the Online Manual explains how FinishLynx handles several cameras.

Good to know

FinishLynx finds the cameras when it opens. A camera that wasn't connected and loaded then can't be set to capture until it loads.