Glare from the sun

When the sun shines straight into the lens it washes the image out, and a lens filter won't fix that. The lasting fix is where the camera sits; FinishLynx's exposure and enhancement tools then recover what they can.

How to fix it

Put the sun behind the camera

  1. Where you can, set the camera up on the side of the track where the sun sets behind it. It still has to sit in the plane of the finish line
  2. The best light comes from directly behind the camera and reflects off the athletes back to the lens

Bring the exposure down

  1. Keep Gain Method on AGC with Auto Iris on (Camera Settings | Parameters tab)
  2. If the image is still overexposed and the gain reads between 70 and 90, lower Brightness in steps of 5, capturing test images until it looks right. Recheck as the sun moves
  3. If the Close Iris button does nothing, see Image is fully washed out or white

Improve the captured image

  1. Enhance: right-click and drag a box over an area where an athlete blends into the background, then choose Enhance. Click Unenhance to undo it, even after the image is saved
  2. Quick Adjust: each click of the Quick Adjust button changes the gamma by 0.10. Shift-click undoes one step and Ctrl-click resets
  3. Part sun, part shadow: use Multiple Region Enhancement to enhance each region separately
    • Click to the left of the image pane in the Image Zone and choose Enhancement (not Lanes); an "E" appears in the side bar
    • Drag the bottom of the region to where the light changes, then enhance each region on its own

Watch the Enhance & Quick Adjust video. The Image Quality Tools page of the Online Manual covers each tool in detail.

Good to know

LuxBoost adds light sensitivity for dark conditions. It won't help with glare, so leave it for low light.

Related resources