Image is fully washed out or white

A fully washed-out or white image means the iris is open too far and too much light is reaching the sensor. When the Close Iris button does nothing, FinishLynx usually can't reach the iris: the Iris Type doesn't match the lens, or the lens cable isn't connected. Check the Iris Type first.

How to fix it

Match the Iris Type to your lens

  1. Read the lens model printed on the side of the lens
    • A lens with no cable coming out of it is a manual lens: skip to the next section
  2. Open Camera Settings: select the camera in the Hardware Control window and click the blue "i" icon, or double-click the camera name
  3. On the Setup tab, near the bottom, set Iris Type to match the lens
    • 2.8-10mm lens (common on Vision and Vision PRO): P-Iris
    • 8-48mm lens (common on Vision): Normal
    • 12.5-75mm lens (common on Vision PRO): Normal
  4. Click OK

Close the iris

  1. Remote iris lens: in the Hardware Control window, click Close Iris until the image darkens
  2. Or let FinishLynx manage it: on the Camera Settings | Parameters tab set Gain Method to AGC, check Auto Iris and set Brightness to 60-80 for a white finish line (track and field) or 20-40 for a dark finish line
  3. Manual iris lens: close the iris with the iris ring on the lens itself until the image darkens

Still too bright

  • A P-Iris lens (2.8-10mm) must have its cable plugged into the Remote port on the back of the camera, or into the Remote Positioner. Unplugged, FinishLynx can't move the iris
  • With AGC on and the gain reading between 70 and 90, lower Brightness in steps of 5, capturing test images until it looks right. Recheck as the sun moves
  • An F-mount lens with a mechanical iris needs its iris closed by hand before it is mounted: see Will this lens work?
  • If the zoom, focus and Remote Positioner don't respond either, the camera has lost its remote-control link: see Can't control remote iris. Until it's fixed, raising the frame rate (Camera Settings | Parameters) darkens the image
  • If Camera Settings doesn't have these options, your FinishLynx is too old to have them (version 10.10, for example). Install the current version from the Software page; your existing serial number works with it

If the sun is shining into the lens, a filter won't fix it: see Glare from the sun. The Gain Control Tools page of the Online Manual explains AGC, Brightness and Auto Iris.