Will this lens work?

Before buying or fitting a lens, check three things: its iris type is supported, its mount matches your camera (with the right adapter), and its format covers the camera's sensor.

How to fix it

Iris type

  • EtherLynx cameras support motorized (Normal) and P-Iris remote-iris lenses, as well as manual lenses. DC auto-iris lenses are not supported
  • After fitting a remote lens, set the matching Iris Type: see Can't control remote iris

Lens mount by camera

  • Vision (5L500) and Vision PRO (5L600): CS-mount lenses fit directly; C-mount lenses need the CS-C adapter. F-mount is an option on the Vision PRO
  • Vision PRO X (5L700): F-mount as standard; C-mount is an option with limited vertical resolution; no CS-mount
  • EtherLynx 2000, PRO and Fusion: C-mount, with F-mount as an option. CS-mount lenses can't be used on these cameras

Fitting the lens and the CS-C adapter (a 5mm ring)

  1. A C-mount lens on a CS-mount camera (Vision, Vision PRO) needs the adapter, for example the 8-48mm and 12.5-75mm lenses. The thin 5mm ring is this adapter, not a washer
  2. A CS-mount lens on a CS-mount camera mounts directly with no adapter, for example the 2.8-10mm lens
  3. Fit the adapter first, then screw the lens in only until it reaches its stop. Don't overtighten
  4. Plug the lens cable into the Remote port on the back of the camera, or into the Remote Positioner, then set the Iris Type
  5. The adapter can stay threaded on the camera and blend in. If a CS-mount lens won't focus at any distance, check the adapter isn't still fitted

Remote control by mount

  • CS-mount lenses: remote iris only
  • C-mount lenses: remote iris, focus and zoom
  • F-mount lenses: remote iris and focus
  • E-type F-mount lenses (Nikon and Sigma lenses with an electronic diaphragm): on a Vision PRO or Vision PRO X with the latest F-mount adapter, the iris is controlled through the lens contacts, with no cable to the Remote port

F-mount lens with a mechanical iris

  1. Close the lens iris by hand before mounting the lens
  2. Check that the small iris tab inside the camera's F-mount is in the correct position
  3. If the aperture buttons click but the image doesn't change, these are the first things to check

Check these

  • Black bars or shading at the top and bottom of the image at maximum height in Zoom 100% mean the lens format doesn't cover the sensor (vignetting). On a Vision PRO, the 2.8-10mm lens gives full resolution only between 6.5 and 10mm, so zoom in to avoid it
  • Choosing a focal length: use this site's Lens Calculator

The Lenses & Mounts page of the Online Manual lists the common recommended lenses and formats, the Position & Lens Controls page lists the tested E-type lenses, and the CS-C Mount Adapter User Guide covers the adapter. The 2.8-10mm P-Iris lens video shows that lens on the Vision and Vision PRO.

Related resources