Rain and weather protection
IdentiLynx and VeriLynx cameras have no IP (water resistance) rating. The weak point is the Ethernet connection at the back of the camera, so outdoors always use the Ethernet cable with the weatherproof XLR-RJ45 connector. Without it, water can get into the camera and damage it.
How to fix it
Protect the camera
- Use the Lynx Ethernet cable with the weatherproof XLR-RJ45 connector. It normally comes with the camera when bought from Lynx: the SR-2 and HRS ship with a 100 ft (33 m) cable (part WPCAT6-100), as the IdentiLynx SR-2 & HRS QSG lists
- If you only have the camera, Lynx sales can supply the cable and other accessories through Get a Quote on finishlynx.com
- That cable handles light rain. If heavier rain is expected, add a cover over the camera: a plexiglass or plastic shield above it, or a soft rain cover
- Keep the cover clear of the lens so it doesn't show in the image
If the camera got wet
- Power it off and let it dry out completely before using it again
- If it drops out of FinishLynx or won't boot after drying, work through Camera dropping randomly
- If it still misbehaves, it needs testing: send it in to Lynx
Send it in for repair
Start an RMA. The portal walks you through what to include and where to ship it.
Related resources
- IdentiLynx SR-2 & HRS QSG — Guide · PDF
- Get a Quote on finishlynx.com — Link