Black image when capturing

A black image usually means the iris is closed too far or the brightness is set too low. The fix depends on the model.

How to fix it

On a B91 or B95 IdentiLynx

  1. Click the Open Iris icon until the image appears

On a model with a manual iris lens

  1. Open the iris on the lens itself until the image appears

On an SR, SR-2 or HRS

These cameras have an automatic iris that you can't adjust. Exposure is set with the brightness value, or a slower shutter speed.

  1. Check the Brightness setting. The default is about 60; set it back if it has been changed
    • Set it in the Gain column of the Hardware Control window, or in Camera Settings | Parameters
    • The Gain column shows two numbers. The one in parentheses is the target brightness you set. The one to its left is the gain, how much light enhancement the camera had to apply to reach that target
  2. If the image is still black, restart the camera and try again
    • In the Hardware Control window, right-click the camera's Power field and choose Power | Restart
  3. If the image comes back but is blurry and auto-focus does nothing, the lens has probably been knocked out of place: see Image is blurry and can't focus

If there is still no image after restarting

The camera needs a repair: send it in to Lynx.

Send it in for repair

Start an RMA. The portal walks you through what to include and where to ship it.

Submit an RMA