No image when capturing

A fully white or black image usually means the iris is too far open or closed. The fix depends on the model. If the camera loads but the image pane stays empty, restart the camera.

How to fix it

On a B91 or B95 IdentiLynx

  1. Click the Open Iris or Close Iris icon until the image looks right
    • A black image needs the iris opened; a white image needs it closed

On a model with a manual iris lens

  1. Turn the iris ring on the lens itself until the image looks right

On an SR, SR-2 or HRS, or if there is no image at all

  1. Restart the camera and try again
    • An SR, SR-2 or HRS can be restarted from FinishLynx: in the Hardware Control window, right-click the camera's Power field and choose Power | Restart. The IdentiLynx manual page shows this
  2. If the image is black rather than missing, work through Black image when capturing
  3. If there is still no image after restarting, the camera needs a repair: send it in to Lynx

Send it in for repair

Start an RMA. The portal walks you through what to include and where to ship it.

Submit an RMA