FinishLynx connection

ResulTV and FinishLynx talk over the local network: ResulTV listens on a port with Network (listen), and FinishLynx connects to it with Network (connect) and a ResulTV_Video script. Both must use the same port, and the ResulTV computer's firewall must let FinishLynx in.

How to fix it

Set ResulTV to listen

  1. Open ResulTV and go to File | Options | Sources tab.
  2. Set Script to Video Display.rss.
  3. Set Serial Port to Network (listen) and Port to 1024.
  4. Click OK. If the source status says Not Loaded, close and reopen ResulTV.
  5. Click File | Open… and open the Video Display.rtv layout.

Set FinishLynx to connect

  1. Go to Scoreboard | Options and click New.
  2. Set Script to a ResulTV_Video script, for example ResulTV_Video_1line.lss or ResulTV_Video_3lines.lss.
  3. Set Serial Port to Network (connect), Port to 1024, and IP Address to the IP address of the ResulTV computer.
  4. Set Running Time to Normal, and check Force Stop in the Options next to it.
    • Force Stop stops the clock as soon as results are available, even when no photoeye is used.
  5. Set Results to Auto, check Paging, and set Size to the number of result lines in the script you chose.
  6. Check Always send place.
  7. Click OK and restart FinishLynx if the status says Not Loaded.
  8. Open an event in FinishLynx. ResulTV should start showing the running time and results.

The video How to Configure ResulTV Display Software with FinishLynx shows the FinishLynx side, and the ResulTV Quick Start Guide has both sides with screenshots.

What the status means

  • Not Loaded: that program needs to be closed and reopened.
  • Not Running: Serial Port is set to None. Pick the network option and click OK.
  • Not Connected: the port is set but no connection has been made yet. Work through the checks below.
  • Running in FinishLynx only means FinishLynx is sending. It says Running even when nothing receives the data, so always check the status on the ResulTV side too.

If both programs say Not Connected

  1. Check one program connects and the other listens: FinishLynx on Network (connect), ResulTV on Network (listen).
  2. Use the same port number in both, such as 1024. A port of 0 won't connect.
  3. Confirm the IP address in the FinishLynx scoreboard entry is the ResulTV computer's address, and that both computers are on the same network subnet.
  4. Allow ResulTV through Windows Defender Firewall on the ResulTV computer.
    • Open Windows Security | Firewall & network protection | Allow an app through firewall and click Change settings.
    • If ResulTV isn't in the list, click Allow another app… and browse to ResulTV.exe.
    • Tick ResulTV in all three columns, Domain, Private and Public, and click OK.
    • Seeing each other's shared folders, or netstat showing ResulTV listening on port 1024, doesn't prove the firewall lets FinishLynx in.
  5. If either status says Not Loaded, close and reopen that program.

If FinishLynx lists only serial ports

  1. Update FinishLynx. FinishLynx 13.00 and later include the Network ComPort (NCP), which adds the Network choices. Download the current version from the Software page; you need your FinishLynx serial number from Help | About.
  2. A demo copy of FinishLynx can only test scoreboard output on a serial port, not over the network. Test the network connection with a licensed copy.

FinishLynx and ResulTV on the same computer

  1. Set up the connection as above: FinishLynx on Network (connect), ResulTV on Network (listen), and the same port (such as 1024) in both.
  2. In FinishLynx, enter 127.0.0.1 (this computer) as the IP Address.
  3. In Windows display settings, extend the desktop to the second screen (a monitor, TV or LED board on HDMI). Then in ResulTV go to File | Options, open the Display tab and select Monitor 2. See Displaying ResulTV on multiple monitors.

Connected but the screen stays blank: see Source is set up but nothing shows. "Demo" in the ResulTV title bar: see License, dongle and serial number.

Related resources